Shop By
Currently Shopping by
-
Brands:
TT
Weicon
Applied
Shopping Options
- Saatavuus
- Price
- Brands
- ACV (1)
- Applied (3)
- Bugari (12)
- Cabelcon (2)
- Cavel (1)
- Cembre (2)
- Chemtronic (1)
- Chemtronics (59)
- CSL Group (1)
- Deviser (1)
- Dueci (5)
- EIC (4)
- Electrolube (68)
- Eupen (5)
- Fixpoint (1)
- Hanlong (92)
- Hobbes (1)
- Inno Instrument (1)
- ITS (1)
- Jung (2)
- Marushin (1)
- Miyama (6)
- Rennsteig (24)
- SAT-Kabel (1)
- Solnet (17)
- Stella Doradus (1)
- Teledyne (1)
- TEMPO (31)
- TT (12)
- TTB (1)
- Victor (1)
- Weicon (4)
- Wisi (3)
- Xytronics (40)
- false
Työkalut ja kemikaalit
Grid List
19 Item(s)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
VSAT-ACM Module to XR-3
Compatible with XR-3 Modular Test Instrument MEASUREMENTS Demodulates DVB-S , DVB- S 2 & DVB-S2X (CCM, ACM, & VCM) signals Signal Level (dBm , dBmV, or dBμV) with present and peak bar graph Signal Quality (IRD, C/N, E b/No, or Es/No) Pre-FE C & Post-FEC BER (Bit Error Rate) PER (Packet Error Rate) Voltage output of IRD / IDU (29 Vmax) Current draw of LNB LNB frequency deviation (LNB LO drift estimate) Symbol Rate error Spectrum Screen (frequency on x-axis, amplitude on y-axis) Constellation Screen (I and Q demodulator values) Frequency Range 950-2150 MHz Tuning Resolution 4 kHz Signal Level Range -65 to - 25 dBm (+44 to +84 dBμV) RF Level Accuracy +/- 2 dB typical, 3 dB max Signal Lock Formats DVB- S (QPSK) ,DVB-S2 & DVB-S2X (QPSK, 8PSK ,16 APSK, 32 APSK , CCM , VCM , ACM ) , DSS / DIRECTV Legacy (QPSK) Impedance 75 Ohm LNB Power 13VDC for V/R, 18VDC for H/L 21VDC for DIRECTV SWiM LNBs , 29VDC Switch Control 22 kHz, DiSEqC RF Connector F-barrel , field replaceable Warranty 12 month limited Specifications are subject to change without notice. Learn More€780.00 (alv 0%)XR-S2XACM-01
-
-
Kohinageneraattori 5-2150MHz
RF Noise Generator for Testing and Aligning The NS-1 is a handheld broadband noise generator. It generates a wide, flat, RF noise-signal. The NS-1 is popular for testing network components and aligning a building’s coaxial cable network. The NS-1’s signal is injected into the network at point A. Using a signal receiver, such as a signal level meter (like Applied Instruments' XR-3 or Super Buddy) or spectrum analyzer, the NS-1’s signal is received at point B. The frequency response of the network, between points A and B, is obtained. This measurement allows the user to verify the integrity of cabling and its associated connections at all frequencies between 1 and 2150 MHz. Learn More€513.72 (alv 0%)NS-1
-
Grid List
19 Item(s)