My Cart

0 item(s)

Työkalut ja kemikaalit

Grid  List 

6 Item(s)

Set Ascending Direction
  1. Puristuspihti DV14 F-liittimelle

    Puristuspihti DV14 F-liittimelle

    Puristuspihdit DV14 kompressioliittimille Learn More
    €70.40 (alv 0%)

    DZ14

  2. Kuorintapihti Coax MK90/95/99a kaapeleille Ø5mm-9mm
  3. F-liitinavain

    F-liitinavain

    €5.93 (alv 0%)

    DZ01

  4. Modular Test Instrument Base Unit

    Modular Test Instrument Base Unit

    €1,008.00 (alv 0%)

    XR-3

  5. VSAT-ACM Module to XR-3

    VSAT-ACM Module to XR-3

    Compatible with XR-3 Modular Test Instrument MEASUREMENTS Demodulates DVB-S , DVB- S 2 & DVB-S2X (CCM, ACM, & VCM) signals Signal Level (dBm , dBmV, or dBμV) with present and peak bar graph Signal Quality (IRD, C/N, E b/No, or Es/No) Pre-FE C & Post-FEC BER (Bit Error Rate) PER (Packet Error Rate) Voltage output of IRD / IDU (29 Vmax) Current draw of LNB LNB frequency deviation (LNB LO drift estimate) Symbol Rate error Spectrum Screen (frequency on x-axis, amplitude on y-axis) Constellation Screen (I and Q demodulator values) Frequency Range 950-2150 MHz Tuning Resolution 4 kHz Signal Level Range -65 to - 25 dBm (+44 to +84 dBμV) RF Level Accuracy +/- 2 dB typical, 3 dB max Signal Lock Formats DVB- S (QPSK) ,DVB-S2 & DVB-S2X (QPSK, 8PSK ,16 APSK, 32 APSK , CCM , VCM , ACM ) , DSS / DIRECTV Legacy (QPSK) Impedance 75 Ohm LNB Power 13VDC for V/R, 18VDC for H/L 21VDC for DIRECTV SWiM LNBs , 29VDC Switch Control 22 kHz, DiSEqC RF Connector F-barrel , field replaceable Warranty 12 month limited Specifications are subject to change without notice. Learn More
    €780.00 (alv 0%)

    XR-S2XACM-01

  6. Kohinageneraattori 5-2150MHz

    Kohinageneraattori 5-2150MHz

    RF Noise Generator for Testing and Aligning The NS-1 is a handheld broadband noise generator. It generates a wide, flat, RF noise-signal. The NS-1 is popular for testing network components and aligning a building’s coaxial cable network. The NS-1’s signal is injected into the network at point A. Using a signal receiver, such as a signal level meter (like Applied Instruments' XR-3 or Super Buddy) or spectrum analyzer, the NS-1’s signal is received at point B. The frequency response of the network, between points A and B, is obtained. This measurement allows the user to verify the integrity of cabling and its associated connections at all frequencies between 1 and 2150 MHz. Learn More
    €513.72 (alv 0%)

    NS-1

Grid  List 

6 Item(s)

Set Ascending Direction