Rajaa
Tämänhetkinen rajaus
- Impedanssi: Poista tämä 50
-
Kaapelityyppi:
Aircell
SeaTex
Ominaisuudet
- Saatavuus
- Hinta
- Tuotemerkki
- Impedanssi
- CPR
- Suojaus
- Väri
- Kaapelityyppi
Koaksiaalikaapelit 50 ohm
Taulukkona Lista
7 Nimike(ttä)
-
-
-
-
Antennikaap 50ohm SeaTex 5 SHF2 HF ø5mm 505m kela
SeaTex 5 on erityisesti merenkulkuun suunniteltu matala-häviöinen, halogeeniton ja erittäin taipuisa koaksiaalikaapeli. Se omaa maailmanlaatuisen SHF-alustenrakennushyväksynnän (DNV GL -sertifikaatin) ja soveltuu käytettäväksi laivoilla, öljyalustoilla, porauslautoilla ja tuuliturbiineilla. SeaTex 5:n ulkokuori on valmistettu erityisestä termoplastisesta kopolymeeristä (SHF2), mikä antaa kaapelille korkean vastustuskyvyn kuumuutta, kylmyyttä, öljyjä, suolavettä, UV-säteilyä ja sääolosuhteita vastaan ja takaa pitkän käyttöiän vaativissa ympäristöissä. SeaTex 5:n suunnittelu perustuu vakiintuneeseen Aircell 5:een. Se tarjoaa erinomaiset vaimennusarvot, ja sen taipuisuus ja pieni taivutussäde mahdollistavat asennuksen ahtaimpiinkin tiloihin. Näin ollen SeaTex 5 yhdistää Ecoflex-koaksiaalikaapeleiden edut korkean meren vaatimuksiin. Tuote on määritetty jopa 10 GHz asti ja voidaan käyttää lämpötila-alueella -55–85 °C. Ominaisuudet: Halkaisija 5,0 ± 0,2 mm Impedanssi 50 ± 2 Ω Vaimennus 1 GHz:ssä / 100 m 31,09 dB Maksimitaajuus 10 GHz Tekniset tiedot: Sisäjohtimen materiaali: paljas kuparilanka Sisäjohtimen halkaisija: Ø 1 x 1,13 mm Eriste: vaahtoava polyeteeni (PE) ulkopuolisella kuorella PE halkaisija: Ø 3,1 mm Ulompi suojus 1: kuparifolio 100% peitto Ulompi suojus 2: paljaiden kuparilankojen punos, peitto: 70% Ulomman johtimen halkaisija: Ø 3,7 mm Kuori: termoplastinen kopolymeeri (SHF2), musta Paino: 36 kg/km Min. Taivutussäde: 4XØ yksittäinen, 8XØ toistuva Lämpötila-alue: -55 - +85 °C kuljetus ja kiinteä asennus, -40 - +85 °C joustava käyttö Vetolujuus: 100 N Lue lisää...5,46 € (alv 0%)SEATEX05505
-
Antennikaap 50ohm Aircell7 6GHz ø7,3mm 505m kela Eca
Aircell 7 is a highly flexible coaxial cable for the frequency range up to 6 GHz. The very low damping in relation to the diameter and the small bending radius make the application interesting and recommendable for many applications in high-frequency technology. The low attenuation of Aircell 7 is achieved by a low-loss PE-LLC dielectric with a gas content of over 70%. The material is also resistant to moisture. The inner conductor, a 19-conductor strand of low-oxygen copper, allows the extraordinary flexibility of the cable. To achieve good attenuation, the Aircell 7 outer conductor is double-layered: on a thin, overlapping copper foil, a copper shielding braid with a degree of coverage of 85% is applied. The film is PE-coated on the inside and thus protected against cracking if the bending radius is too small. The black PVC outer jacket of Aircell 7 is UV-stabilized. Aircell 7 is a modern and widely used coaxial cable for numerous applications: it is extremely flexible, low-attenuation and anti-radiation. Specifications Diameter 7.3 ± 0.2 mm Impedance 50 ± 2 Ω Attenuation at 1 GHz / 100 m 20.44 dB f max 6 GHz Lue lisää...2,89 € (alv 0%)AIRCELL7505
-
Antennikaap 50ohm Aircell5 10GHz ø5,0mm 505m kela Eca
Aircell 5 is a five millimeter thin, flexible coaxial cable for the frequency range up to 10 GHz. The very low attenuation in relation to the diameter and the alternative usability of standard RG-58 coaxial connectors make this cable the first choice not only for wireless LAN but for many applications in telecommunications. The relatively low attenuation of Aircell 5 is achieved by a low-loss PE-LLC dielectric with a gas content of over 70%. The material is also resistant to moisture. The solid core conductor of Aircell 5 is drawn from low-oxygen copper (OFC). In order to achieve good shielding and low losses, the Aircell 5 outer conductor is made of two layers of copper: on a thin, overlapping copper foil, a shielding layer with a degree of coverage of 70% is applied. The film is PE-coated on the inside and thus protected against cracking if the bending radius is too small. The black PVC outer jacket of Aircell 5 is UV-stabilized. Due to its outer diameter of 5 mm, Aircell 5 can be used with almost all commercially available coaxial connectors for 5 mm coaxial cables. Aircell 5 is a modern coax cable for many applications in telecommunications: it is relatively flexible, low-attenuation and anti-radiation. Specifications Diameter 5.0 ± 0.2 mm Impedance 50 ± 2 Ω Attenuation at 1 GHz / 100 m 29.54 dB f max 10 GHz Lue lisää...1,72 € (alv 0%)AIRCELL5505
-
Antennikaap 50ohm Aircom Premium 12GHz ø10,2mm 505m kela Eca
Aircom Premium is an ultra-low-loss coaxial cable with an upper limit frequency of 12 GHz. It is characterized by a very low weight and a very low attenuation. The high-precision shaped aluminum inner conductor is enclosed by a copper foil, which is applied to the inner conductor and welded there. The skin effect ensures a high-performance RF line. The precise formability of the aluminum core is responsible for almost no defects in the entire frequency range. In addition, the new cable of the Aircom family is most suitable for digital modulation methods, as it is very low in intermodulation. The extremely low damping of Aircom Premium is achieved by a low-loss PE dielectric. The material is also resistant to moisture. In order to achieve good shielding with low losses, the outer conductor of the Aircom Premium is made of two layers of copper: on a thin, overlapping copper foil, a shielding braid with a coverage of 75% is applied. The film is PE-coated on the inside and thus protected against crack formation with a single too small bending radius. The black PVC outer jacket of the Aircom Premium is UV-stabilized. Aircom Premium is a coaxial cable for most applications in the news and radio technology: it is flexible, low-attenuation and anti-radiation. Specifications Diameter 10.2 ± 0.2 mm Impedance 50 ± 2 Ω Attenuation at 1 GHz / 100 m 11.88 dB f max 12 GHz Lue lisää...9,02 € (alv 0%)AIRC10505
Taulukkona Lista
7 Nimike(ttä)
