Koaksiaalikaapelit 50 ohm
-
Antennikaap 50ohm Ecoflex5 6GHz ø5,5mm 102m kela Fca
Ecoflex 5 is a thin and extremely flexible coaxial cable designed for frequencies up to 6 GHz. Due to its low loss in relation to the outer diameter of 5,5 mm and the very small bending radius the cable can be used for numerous RF applications. The low attenuation values of Ecoflex 5 are achieved by using advanced manufacturing techniques and low loss PE-LLC dielectric with a foaming rate of more than 70%. This unique dielectric also offers water resistance and long term stability. The inner conductor of Ecoflex 5 contains 19 stranded bare copper wires with diameter of 0,287 mm each, manufatured from low oxygen copper (OFC). Such inner conductor structure provide the cable its remarkable flexibility. Further advantages of this cable include the use of double shielding which is constructed of overlapping 100 % tight copper foil and an additional shield braiding of bare copper wires with 80 % coverage. The copper foil has an applied PE coating which prevents foil cracking due to short radius bends. The black PVC jacket of Ecoflex 5 is UV-stabilized. Ecoflex 5 is an innovative coaxial cable, which is the right choice, when an extremely flexible, very low loss, and microwave rated cable is required. It can be used for numerous RF applications. Characteristics: Diameter 5.5 ± 0.2 mm Impedance 50 ± 2 Ω Attenuation at 1 GHz / 100 m 26.13 dB f max 6 GHz Learn More€2.01 (alv 0%)EFL5
-
RG-kaapeli 50ohm 2,25/8,05mm Ø10,3mm PVC, Eca
RG cables are now internationally established as a standard and are used in all areas of electronics, especially in measurement, radio and information technology. Our 50 Ohm coaxial cables are available in all common outer diameters, both single and multiple shielded. Furthermore, our RG coaxial cables are manufactured according to the specifications of MIL C-17. Learn More€3.20 (alv 0%)RG213BEK
-
RG-kaapeli 50ohm 500m 19x0,18 ø5,0 MIL C17F
Coaxial braided shielded cable Shield: braided in tinned copper covering 98% Stranded conductor in tinned copper Cable for video frequency - MIL C17 Standards Suitable for the connection of antennas and for cable assembly: WLAN, GPS, Mobile phone, Car phone, Automotive, Network access device. Moreover for CCTV installations, Control Video-cameras and Video-security etc. Learn More€0.73 (alv 0%)RG58MI500
-
Antennikaap 50ohm Ecoflex10 PLUS HEATEX HF ø10,2mm 102m kela Cca
Ecoflex 10 Plus Heatex Ecoflex 10 Plus Heatex is a halogen-free and flame-retardant coaxial cable for use in buildings, plants, ships and hazardous areas. The strong increase in demand for low-loss cables, which meet all the relevant requirements with regard to flame retardancy and low emissions in the event of fire, led to the development of the Ecoflex cables with Heatex jacket. Ecoflex cables with Heatex sheaths are flame retardant and have a low fire propagation. Heatex coats are low in smoke, the escape routes remain visible in case of fire. Heatex coats are halogen-free and contain no reactive elements such as fluorine, chlorine and bromine. They do not produce corrosive gases which can lead to high property damage. By contrast, standard coaxial cables with a PVC sheath are not halogen-free and therefore can not be used in hazardous areas. Critical to PVC cables is also the possible transmission of the flames in case of fire - a danger that exclude Ecoflex Heatex cables safely. The UV stability of the durable Heatex jacket also allows unrestricted outdoor use. Ecoflex 10 Plus Heatex has a 7-core hybrid core conductor with aluminum core and welded copper sheath. The surface finish and the corresponding HF properties are significantly better than those of conventional copper strands. Another advantage is the double shielding: an overlapping copper foil and an overlying copper braid ensure a high shielding factor of > 90 dB at 1 GHz. With the fire protection rating Cca Ecoflex 10 Plus Heatex is approved for installation in public buildings. Ecoflex 10 Plus Heatex is certified for railway applications for interior and exterior use according to requirement sets R15 and R16 of the EN45545-2 standard. Learn More€5.72 (alv 0%)EFL10PHX
-
RG223-kaapeli 50 Ohm 0,9/4mm Ø5,4mm Hopeoitu 1GHz@48,5dB Fca
Tasker RG223 - Hopeoidun koaksiaalikaapelin pääominaisuus on kaksinkertainen suojaus, mahdollistaa käytön meluisissa ympäristöissä. Sekä keskilanka että punotut kupari suojat ovat päällystetty hopealla, estävät näin hapettumisprosessin johtamisen lisäämisen lisäksi. Kaapeli soveltuu mainiosti lähetysantennien syöttökaapeliksi. Kaapelin käyttöä voidaan soveltaa antennien liittämiseen ja liitosjohtoihin muun muuassa: WLAN, GPS, matkapuhelin, autopuhelin, verkkoyhteys laitteille... Lisäksi CCTV-asennuksiin, ohjausvideokameroihin ja videovalvontaan. Tekniset tiedot: Musta PVC-vaippa. Ulko. Ø 5,40 (± 0,20) mm. Kaksinkertainen hopeoitu punottu suojaus 2x 98% Johdin: Ø 0,90 mm. hopeoitu kuparilanka Johdinresistanssi 28 Ω / km Kapasiteetti ydin/suoja 100 pF / m Käyttölämpötila -15 / + 70 ° C Kaapelissa merkinnät: tasker® RG 223 U MIL-C-17F 50 OHM DOUBLE SHIELD Made In Italy Learn More€3.15 (alv 0%)RG223
-
Antennikaap 50ohm Ecoflex10 PLUS HEATEX HF ø10,2mm 505m kela Cca
Ecoflex 10 Plus Heatex is a halogen-free and flame-retardant coaxial cable for use in buildings, plants, ships and hazardous areas. The strong increase in demand for low-loss cables, which meet all the relevant requirements with regard to flame retardancy and low emissions in the event of fire, led to the development of the Ecoflex cables with Heatex jacket. Ecoflex cables with Heatex sheaths are flame retardant and have a low fire propagation. Heatex coats are low in smoke, the escape routes remain visible in case of fire. Heatex coats are halogen-free and contain no reactive elements such as fluorine, chlorine and bromine. They do not produce corrosive gases which can lead to high property damage. By contrast, standard coaxial cables with a PVC sheath are not halogen-free and therefore can not be used in hazardous areas. Critical to PVC cables is also the possible transmission of the flames in case of fire - a danger that exclude Ecoflex Heatex cables safely. The UV stability of the durable Heatex jacket also allows unrestricted outdoor use. Ecoflex 10 Plus Heatex has a 7-core hybrid core conductor with aluminum core and welded copper sheath. The surface finish and the corresponding HF properties are significantly better than those of conventional copper strands. Another advantage is the double shielding: an overlapping copper foil and an overlying copper braid ensure a high shielding factor of > 90 dB at 1 GHz. With the fire protection rating Cca Ecoflex 10 Plus Heatex is approved for installation in public buildings. Ecoflex 10 Plus Heatex is certified for railway applications for interior and exterior use according to requirement sets R15 and R16 of the EN45545-2 standard. Specifications Diameter 10.2 ± 0.2 mm Impedance 50 ± 2 Ω Attenuation at 1 GHz / 100 m 13.49 dB f max 8 GHz Euroclass acc. to EN 50575 Cca Learn More€5.72 (alv 0%)EFL10PHX505
-
RG-kaapeli 50ohm 19x0,18 ø5,0 MIL C17F
Coaxial braided shielded cable Shield: braided in tinned copper covering 98% Stranded conductor in tinned copper Cable for video frequency - MIL C17 Standards Suitable for the connection of antennas and for cable assembly: WLAN, GPS, Mobile phone, Car phone, Automotive, Network access device. Moreover for CCTV installations, Control Video-cameras and Video-security etc. Learn More€0.95 (alv 0%)RG58MI
-
Antennikaap 50ohm Ecoflex15 PLUS HEATEX HF ø14,6mm 505m kela Cca
Ecoflex 15 Plus Heatex is a halogen-free and flame-retardant coaxial cable for use in buildings, plants, ships and hazardous areas. The strong increase in demand for low-loss cables, which meet all the relevant requirements with regard to flame retardancy and low emissions in the event of fire, led to the development of the Ecoflex cables with Heatex jacket. Ecoflex cables with Heatex sheaths are flame retardant and have a low fire propagation. Heatex coats are low in smoke, the escape routes remain visible in case of fire. Heatex coats are halogen-free and contain no reactive elements such as fluorine, chlorine and bromine. They do not produce corrosive gases which can lead to high property damage. By contrast, standard coaxial cables with a PVC sheath are not halogen-free and therefore can not be used in hazardous areas. Critical to PVC cables is also the possible transmission of the flames in case of fire - a danger that exclude Ecoflex Heatex cables safely. The UV stability of the durable Heatex jacket also allows unrestricted outdoor use. Ecoflex 15 Plus Heatex has a 7-core hybrid core conductor with aluminum core and welded copper sheath. The surface finish and the corresponding HF properties are significantly better than those of conventional copper strands. Another advantage is the double shielding: an overlapping copper foil and an overlying copper braid ensure a high shielding factor of > 90 dB at 1 GHz. With the fire protection rating Cca Ecoflex 15 Plus Heatex is approved for installation in public buildings. Ecoflex 15 Plus Heatex is certified for railway applications for interior and exterior use according to requirement sets R15 and R16 of the EN45545-2 standard. Specifications Diameter 14,6 ± 0,3 mm Impedance 50 ± 2 Ω Attenuation at 1 GHz / 100 m 9.80 dB f max 8 GHz Euroclass acc. to EN 50575 Cca Learn More€9.62 (alv 0%)EFL15PHX505
-
RG-kaapeli 50ohm MIL C17F 7x0,16 ø2,8
Tasker RG174MI - Suojattu koaksiaalikaapeli. Soveltuu antennien kytkemiseen ja kaapelikokoonpanoihin, mm. 4G/5G/LTE, WiFi, GPS, autopuhelin, autoteollisuus ... Kaapeli täyttää MIL C17-standardit. Valmistettu Italiassa. Tekniset tiedot: Musta PVC-vaippa. Ulko. Ø 2,80 (± 0,20) mm. Punottu suojaus S.P.C hopeoitu kupari punos 88%. Eriste PE Ø 1,50 (± 0,20) mm. Sisäjohtimet 7x0,16mm nim.poikkileikkaus 1x0,14 mm² Johdinresistanssi 290 Ω / km Kapasitanssi ydin/suoja 92 pF / m Impedanssi 50 Ω Suurin nimellisjännite 1500 V Käyttölämpötila -15 / + 70 ° C Kaapelissa merkinnät: tasker® RG174 A/U 50 OHM MIL.C17/F MADE IN ITALY Vaimennus dB/100m: 50MHz 17,50 100MHz 25,80 200MHz 38,20 400MHz 54,90 800Mhz 77,00 1000Mhz 87,50 Learn More€0.60 (alv 0%)RG174MI
-
-
Eupen 7/8 kaapeli 5228-HLFRC Ø 27,8 mm, 50ohm, Cca
Eupen - EC550AFRC - 50 Ohm Antennikaapeli Cca 500m rulla UV-kestävä, halogeeniton, palonestovaippa IEC 60754, IEC 60332-1, IEC 60332-3 cat. C, IEC 61034, NF C 32070 Cat. C1, UL-1685-FT4 / IEEE 1202 ja EN 50399 CPR luokka Cca-s1, d2, a1.Yhteensopiva EN 50575 Learn More€10.50 (alv 0%)EC5-50-A-FRC
-
Eupen 1/2 kaapeli 5128-HLFRC Ø 16 mm, 50ohm, Cca
Eupen - EC450AFRC - 50 Ohm Antennikaapeli Cca 500m UV-kestävä, halogeeniton, vähäsavuinen, palonestovaippa IEC 60754, IEC 60332-1, IEC 60332-3 cat. C, IEC 61034, NF C 32070 Cat. C1, UL-1685-FT4 / IEEE 1202 ja EN 50399 Cca-s1, d2, a1. Yhteensopiva EN 5057 Learn More€6.20 (alv 0%)EC4-50-FRC
-
Antennikaap 50ohm Ø10,3 LMR400 kela 200m 1800MHz/18,6dB Fca
Hansen RF400 on suorituskykyinen koaksiaalikaapeli erilaisissa 3G/4G RF-järjestelmäympäristöissä. Käy niin sisäjakeluun, lähetys-, tukiasema-, langaton matkapuhelin sovelluksiin. Matala VSWR ja erinomainen suojaustehokkuus vähentävät vaimennusta ja suojaa ulkoisista häiriöistä. Tekniset tiedot: - Johdin 2,74mm - Eriste 7,24mm - Halkaisija 10,29mm Vastaa LMR400 ja CFD400 kaapeleita Learn More€3.10 (alv 0%)RF400
-
-
Antennikaap 50ohm Ø6,1 LMR240 vyyhti 200m 1800MHz/35,6dB Fca
Hansen RF240 on suorituskykyinen koaksiaalikaapeli erilaisissa 3G/4G RF-järjestelmäympäristöissä. Käy niin sisäjakeluun, lähetys-, tukiasema-, langaton matkapuhelin sovelluksiin. Matala VSWR ja erinomainen suojaustehokkuus vähentävät vaimennusta ja suojaa ulkoisista häiriöistä. Tekniset tiedot: Sisäjohdin 1,42mm Cu Eriste 3,81mm Ulkohalkaisija 6,10mm Vastaa LMR240 ja CFD240 kaapeleita Learn More€1.78 (alv 0%)RF240
-
7/8 antennikaapeli LSOH 50ohm 500m rulla, low smoke, Eca
Hansenin 7/8" tuuman 50 Ohmin antennikaapeli Hansen 50ohmin korrugoidut koaksiaalikaapelisarjat soveltuvat laajasti antennisyöttöjärjestelmiin: Maa- ja matkapuhelin; jumpperijohdot; laitteiden huone- ja antenniliitännät; armeijan tiedonsiirtoyhteydet; VLF-, AM- ja FM-radiolähetysjärjestelmät; Ilma- ja laivatutkajärjestelmät; Taktiset, restaurointi- ja mobiilit viestintäjärjestelmät. Tekniset tiedot: Sisähalkaisija: 9,05 mm Ulkohalkaisija: 24,9 mm Kuoren paksuus: 1,3 mm Kuoren halkaisija: 27,5 mm Paino: 530 kg/km Minimi taivutussäde: 120 mm CPR-luokka Eca Vaimennukset: Kts. datalehti liitteenä Learn More€8.00 (alv 0%)HA78HF
-
Antennikaapeli 50ohm 1,35/3,6mm Ø5,35mm PVC 3GHz@63,6dB Eca
Description For applications in radio technology we manufacture 50 Ohm high-frequency coaxial cables in various dimensions and designs. In addition to the internationally used robust cable types of the US-MIL standard series RG, we also offer attenuation-optimized versions with improved shielding effectiveness for VSAT, WiFi, RFID, LTE and 5G and other radio services. All cables with an outer jacket of PE can be buried. Usage RF coaxial cable (radio, measurement technology) CPR/DOP Eca Construction Photo Colours and design may differ from the picture Inner conductor dimensions (mm) 1,35 (7x0,45) Inner Conductor material Cu bare Insulation dimensions (mm) 3,60 ± 0,10 Insulation material Cell-PE 1. Outer Conductor material Al-foil Cu tinned Jacket dimensions (mm) 5,35 ± 0,15 Jacket material PVC black Construction Number 950194 Electrical Properties Characteristic impedance (Ω) 50 ± 3,0 Attenuation at 50 MHZ (db/100m) 7,4 Attenuation at 100 MHZ (db/100m) 10,0 Attenuation at 200 MHZ (db/100m) 13,9 Attenuation at 500 MHZ (db/100m) 23,0 Attenuation at 1000 MHZ (db/100m) 33,8 Attenuation at 2000 MHZ (db/100m) 51,3 Attenuation at 3000 MHZ (db/100m) 63,6 Velocity ratio (v/c) 0,81 DC resistance inner conductor (Ω/km) < 17,0 DC resistance outer conductor (Ω/km) < 20,0 Capacitance approx. (pF/m) 83 Mechanical Properties Max. tensile strength (N) 100 Operating temperature range (°C) -50 / +70 Heat of combustion (kWh/m) 0,28 UV-resistance Very good Min. bending radius (dynamic) (mm) 60 Min. bending radius (static) (mm) 30 Weight 0,04 kg/m Other CE n.a. VDE n.a. EN n.a. NSR/LVD n.a. Learn More€1.78 (alv 0%)HFX501336
-
RG58-kaapeli 50 ohm 500m 19x0,18 ø5,0 MIL C17F LSZH Fca
sisäjohdin 0,9 mm Ø 19x0,18 tinattua kuparia eriste 2,95mmØ PE suojaus tinattua kuparia 93% Ø 3,43mm LSZH kuori Ø5mm vaimennus ( 20°C ) 50 MHz dB/100m 10,7 200 MHz dB/100m 23,5 300 MHz dB/100m 29,6 470 MHz dB/100m 38,7 800 MHz dB/100m 53,38 1000 MHz dB/100m 61,1 CPR Fca Learn More€0.94 (alv 0%)RG58FRNC
-
Antennikaap 50ohm Aircell5 10GHz ø5,0mm 102m kela Eca
Aircell 5 is a five millimeter thin, flexible coaxial cable for the frequency range up to 10 GHz. The very low attenuation in relation to the diameter and the alternative usability of standard RG-58 coaxial connectors make this cable the first choice not only for wireless LAN but for many applications in telecommunications. The relatively low attenuation of Aircell 5 is achieved by a low-loss PE-LLC dielectric with a gas content of over 70%. The material is also resistant to moisture. The solid core conductor of Aircell 5 is drawn from low-oxygen copper (OFC). In order to achieve good shielding and low losses, the Aircell 5 outer conductor is made of two layers of copper: on a thin, overlapping copper foil, a shielding layer with a degree of coverage of 70% is applied. The film is PE-coated on the inside and thus protected against cracking if the bending radius is too small. The black PVC outer jacket of Aircell 5 is UV-stabilized. Due to its outer diameter of 5 mm, Aircell 5 can be used with almost all commercially available coaxial connectors for 5 mm coaxial cables. Aircell 5 is a modern coax cable for many applications in telecommunications: it is relatively flexible, low-attenuation and anti-radiation. Diameter 5.0 ± 0.2 mm Impedance 50 ± 2 Ω Attenuation at 1 GHz / 100 m 29.54 dB f max 10 GHz Learn More€1.72 (alv 0%)AIRCELL5
-
Antennikaap 50ohm Aircell7 6GHz ø7,3mm 505m kela Eca
Aircell 7 is a highly flexible coaxial cable for the frequency range up to 6 GHz. The very low damping in relation to the diameter and the small bending radius make the application interesting and recommendable for many applications in high-frequency technology. The low attenuation of Aircell 7 is achieved by a low-loss PE-LLC dielectric with a gas content of over 70%. The material is also resistant to moisture. The inner conductor, a 19-conductor strand of low-oxygen copper, allows the extraordinary flexibility of the cable. To achieve good attenuation, the Aircell 7 outer conductor is double-layered: on a thin, overlapping copper foil, a copper shielding braid with a degree of coverage of 85% is applied. The film is PE-coated on the inside and thus protected against cracking if the bending radius is too small. The black PVC outer jacket of Aircell 7 is UV-stabilized. Aircell 7 is a modern and widely used coaxial cable for numerous applications: it is extremely flexible, low-attenuation and anti-radiation. Specifications Diameter 7.3 ± 0.2 mm Impedance 50 ± 2 Ω Attenuation at 1 GHz / 100 m 20.44 dB f max 6 GHz Learn More€2.89 (alv 0%)AIRCELL7505
-
Antennikaap 50ohm Aircell5 10GHz ø5,0mm 505m kela Eca
Aircell 5 is a five millimeter thin, flexible coaxial cable for the frequency range up to 10 GHz. The very low attenuation in relation to the diameter and the alternative usability of standard RG-58 coaxial connectors make this cable the first choice not only for wireless LAN but for many applications in telecommunications. The relatively low attenuation of Aircell 5 is achieved by a low-loss PE-LLC dielectric with a gas content of over 70%. The material is also resistant to moisture. The solid core conductor of Aircell 5 is drawn from low-oxygen copper (OFC). In order to achieve good shielding and low losses, the Aircell 5 outer conductor is made of two layers of copper: on a thin, overlapping copper foil, a shielding layer with a degree of coverage of 70% is applied. The film is PE-coated on the inside and thus protected against cracking if the bending radius is too small. The black PVC outer jacket of Aircell 5 is UV-stabilized. Due to its outer diameter of 5 mm, Aircell 5 can be used with almost all commercially available coaxial connectors for 5 mm coaxial cables. Aircell 5 is a modern coax cable for many applications in telecommunications: it is relatively flexible, low-attenuation and anti-radiation. Specifications Diameter 5.0 ± 0.2 mm Impedance 50 ± 2 Ω Attenuation at 1 GHz / 100 m 29.54 dB f max 10 GHz Learn More€1.72 (alv 0%)AIRCELL5505
-
-
Antennikaap 50ohm Ø10,3mm PE low loss LMR400 13,2dB/1GHz
Ulkokäyttöön soveltuva Low Loss Coaxial cable 50 Ω, Keskilanka 1x5,72 mm² Vaippa: Polyethylene (PE), Halogeeniton. Kestää sekä mekaanista- että kemikalien aiheuttamaa rasitusta. Käyttölämpötilat: -30/+75°C Väri: Musta (RAL 9004) Learn More€3.80 (alv 0%)C528
-
Antennikaap 50ohm Aircom Premium 12GHz ø10,2mm 505m kela Eca
Aircom Premium is an ultra-low-loss coaxial cable with an upper limit frequency of 12 GHz. It is characterized by a very low weight and a very low attenuation. The high-precision shaped aluminum inner conductor is enclosed by a copper foil, which is applied to the inner conductor and welded there. The skin effect ensures a high-performance RF line. The precise formability of the aluminum core is responsible for almost no defects in the entire frequency range. In addition, the new cable of the Aircom family is most suitable for digital modulation methods, as it is very low in intermodulation. The extremely low damping of Aircom Premium is achieved by a low-loss PE dielectric. The material is also resistant to moisture. In order to achieve good shielding with low losses, the outer conductor of the Aircom Premium is made of two layers of copper: on a thin, overlapping copper foil, a shielding braid with a coverage of 75% is applied. The film is PE-coated on the inside and thus protected against crack formation with a single too small bending radius. The black PVC outer jacket of the Aircom Premium is UV-stabilized. Aircom Premium is a coaxial cable for most applications in the news and radio technology: it is flexible, low-attenuation and anti-radiation. Specifications Diameter 10.2 ± 0.2 mm Impedance 50 ± 2 Ω Attenuation at 1 GHz / 100 m 11.88 dB f max 12 GHz Learn More€9.02 (alv 0%)AIRC10505
-
-
Antennikaap 50ohm Ecoflex15 PLUS HEATEX HF ø14,6mm 102m kela Cca
Ecoflex 15 Plus Heatex is a halogen-free and flame-retardant coaxial cable for use in buildings, plants, ships and hazardous areas. The strong increase in demand for low-loss cables, which meet all the relevant requirements with regard to flame retardancy and low emissions in the event of fire, led to the development of the Ecoflex cables with Heatex jacket. Ecoflex cables with Heatex sheaths are flame retardant and have a low fire propagation. Heatex coats are low in smoke, the escape routes remain visible in case of fire. Heatex coats are halogen-free and contain no reactive elements such as fluorine, chlorine and bromine. They do not produce corrosive gases which can lead to high property damage. By contrast, standard coaxial cables with a PVC sheath are not halogen-free and therefore can not be used in hazardous areas. Critical to PVC cables is also the possible transmission of the flames in case of fire - a danger that exclude Ecoflex Heatex cables safely. The UV stability of the durable Heatex jacket also allows unrestricted outdoor use. Ecoflex 15 Plus Heatex has a 7-core hybrid core conductor with aluminum core and welded copper sheath. The surface finish and the corresponding HF properties are significantly better than those of conventional copper strands. Another advantage is the double shielding: an overlapping copper foil and an overlying copper braid ensure a high shielding factor of > 90 dB at 1 GHz. With the fire protection rating Cca Ecoflex 15 Plus Heatex is approved for installation in public buildings. Ecoflex 15 Plus Heatex is certified for railway applications for interior and exterior use according to requirement sets R15 and R16 of the EN45545-2 standard. Specifications Diameter 14,6 ± 0,3 mm Impedance 50 ± 2 Ω Attenuation at 1 GHz / 100 m 9.80 dB f max 8 GHz Euroclass acc. to EN 50575 Cca Learn More€9.62 (alv 0%)EFL15PHX
-
-
-
-
1/2 antennikaapeli LSOH 50ohm 500m rulla, low smoke, Eca
Hansenin 1/2" tuuman 50 Ohm antennikaapeli Hansen 50ohmin korrugoidut koaksiaalikaapelisarjat soveltuvat laajasti antennisyöttöjärjestelmiin: Maa- ja matkapuhelin; jumpperijohdot; laitteiden huone- ja antenniliitännät; armeijan tiedonsiirtoyhteydet; VLF-, AM- ja FM-radiolähetysjärjestelmät; Ilma- ja laivatutkajärjestelmät; Taktiset, restaurointi- ja mobiilit viestintäjärjestelmät. Tekniset tiedot: Sisäjohdin: 4,8 mm Ulkohalkaisija: 13,8 mm Kuoren paksuus: 1,0 mm Kuoren halkaisija: 15,8 mm Paino: 240 kg/km Minimi taivutussäde: 70 mm CPR-luokka Eca Vaimennukset: Kts. datalehti liitteenä Learn More€4.50 (alv 0%)HA12HF
-
Antennikaap 50ohm Ø4,95 LMR200 vyyhti 200m 1800MHz/46,4dB Fca
Hansen RF200 on suorituskykyinen koaksiaalikaapeli erilaisissa 3G/4G RF-järjestelmäympäristöissä. Käy niin sisäjakeluun, lähetys-, tukiasema-, langaton matkapuhelin sovelluksiin. Matala VSWR ja erinomainen suojaustehokkuus vähentävät vaimennusta ja suojaa ulkoisista häiriöistä. Tekniset tiedot: - Johdin 1,12mm - Eriste 2,95mm - Halkaisija 4,95mm Vastaa: LMR200, CFD200 Learn More€1.30 (alv 0%)RF200
-
RG178-kaapeli 50 Ohm 0,3/1,2mm Ø1,80mm Teflon FEP -55/+205°C
Bda Connectivity - RG178 - Ohut 50 Ohm hopeoitu RG-kaapeli FEP-vaipalla Bda:n RG-kaapelit ovat nykyisin kansainvälisesti vakiintuneita ja niitä käytetään kaikilla elektroniikan alueilla, erityisesti mittauksessa, radio- ja tietotekniikassa. 50 ohmin koaksiaalikaapeleita on saatavana kaikilla tavallisilla ulkohalkaisijoilla, sekä yksittäis- että monisuojattuna. Lisäksi Bda:n RG-koaksiaalikaapelit valmistetaan MIL C-17:n määrittelyn mukaisesti. Valmistus Saksassa. RG178BE on korkean lämpötilan kestävä HF-koaksiaalikaapeli, sovellukset mm. radio ja mittaustekniikkaa. UV-kestävä. Tekniset tiedot: Sisäjohdin 0,3mm 7x0,10mm hopeoidut kuparipäällysteiset teräslangat Eriste FEP 0,84 Ø mm Suojaus punottu hopeoitu kuparipalmikko, punos 95% Ulkohalkaisija FEP 1,80 Ø mm Impedanssi 50 Ω Sisäjohdinresistenssi 784 Ω / km Ulkojohdinresistenssi 76 Ω / km Kapasitanssi 93 pF / m Käyttölämpötila -55...+205 °C Minimi taivutusäde asennus/kiinteä 20/10 mm Paino 0,008 kg/m Learn More€2.41 (alv 0%)RG178BE
-
-
RG214-kaapeli 50 Ohm 2,25/8,68mm Ø10,80mm Hopeoitu, PVC, Eca
Bda Connectivity - RG214BE - 50 Ohm hopeoitu RG-kaapeli PVC-vaipalla, Eca Bda:n RG-kaapelit ovat nykyisin kansainvälisesti vakiintuneita ja niitä käytetään kaikilla elektroniikan alueilla, erityisesti mittauksessa, radio- ja tietotekniikassa. 50 ohmin koaksiaalikaapeleita on saatavana kaikilla tavallisilla ulkohalkaisijoilla, sekä yksittäis- että monisuojattuna. Lisäksi Bda:n RG-koaksiaalikaapelit valmistetaan MIL C-17:n määrittelyn mukaisesti. Valmistus Saksassa. Tekniset tiedot: Sisäjohdin 2,25mm 7x0,75mm hopeoidut kuparilangat Eriste LD-PE 7,24 Ø mm Suojaus 2x punottu hopeoitu kuparipalmikko, punos 95% / 98% Ulkojohdin 8,68 Ø mm Ulkohalkaisija 10,80 Ø mm Impedanssi 50 Ω Sisäjohdinresistenssi 5,5 Ω / km Ulkojohdinresistenssi 4,5 Ω / km Kapasitanssi 101 pF / m Käyttölämpötila -20...+70 °C Minimi taivutusäde asennus/kiinteä 100/50 mm Paino 0,204 kg/m Vaimennukset: 1 MHZ (db/100m) 0,9 10 MHZ (db/100m) 2,1 20 MHZ (db/100m) 3,0 50 MHZ (db/100m) 4,6 100 MHZ (db/100m) 7,2 200 MHZ (db/100m) 11,3 500 MHZ (db/100m) 16,2 1000 MHZ (db/100m) 28,6 2000 MHZ (db/100m) 41,9 3000 MHZ (db/100m) 51,7 Learn More€7.04 (alv 0%)RG214BE
-
RG215-kaapeli 50ohm 7x0,75/7,24 8,1/10,30 Ø11,1mm ARM PVC Fca
Description RG cables are now internationally established as a standard and are used in all areas of electronics, especially in measurement, radio and information technology. Our 50 Ohm coaxial cables are available in all common outer diameters, both single and multiple shielded. Furthermore, our RG coaxial cables are manufactured according to the specifications of MIL C-17. Usage HF coaxial cable (radio, measurement technology) CPR/DOP n.s. Construction Photo Colours and design may differ from the picture Inner conductor dimensions (mm) 7 x 0,75 Inner Conductor material Cub Insulation dimensions (mm) 7,24 Insulation material LD-PE 1. Outer Conductor dimensions (mm) 8,1 1. Outer Conductor material CuGb 1. Outer Conductor opt. coverage (%) 94 Intermediate jacket dimensions (mm) 10,00 ± 0,20 Intermediate jacket material PVC black Jacket dimensions (mm) 10,30 Armouring dimensions (mm) 11,1 Armouring material galvanized Iron wire Armouring opt. coverage (%) 91 Construction Number 911089 Electrical Properties Characteristic impedance (Ω) 50+-2 Attenuation at 1 MHZ (db/100m) 0,5 Attenuation at 10 MHZ (db/100m) 2,0 Attenuation at 20 MHZ (db/100m) 2,9 Attenuation at 50 MHZ (db/100m) 4,7 Attenuation at 100 MHZ (db/100m) 6,8 Attenuation at 200 MHZ (db/100m) 10,1 Attenuation at 500 MHZ (db/100m) 17,1 Attenuation at 1000 MHZ (db/100m) 26,2 Attenuation at 2000 MHZ (db/100m) n.s Attenuation at 3000 MHZ (db/100m) n.s Velocity ratio (v/c) 0,66 DC resistance inner conductor (Ω/km) 5,5 DC resistance outer conductor (Ω/km) 4,5 Capacitance approx. (pF/m) 101 Max. operating voltage (kV DC) 3,7 Loop resistance (mΩ / m) < 10 Test voltage AC (kV AC) 2 (1 Std. / 1 h) Mechanical Properties Max. tensile strength (N) 1500 Operating temperature range (°C) -25 / +70 Heat of combustion (kWh/m) 1,18 UV-resistance Very good Min. bending radius (dynamic) (mm) 70 Min. bending radius (static) (mm) 67 Direct burial Ja Weight 0,285 kg/m Learn More€7.33 (alv 0%)RG215
-
RG-kaapeli 50ohm 2,7/9,4/10,2mm Ø13,80mm MIL-C-17 PVC Eca
Description RG cables are now internationally established as a standard and are used in all areas of electronics, especially in measurement, radio and information technology. Our 50 Ohm coaxial cables are available in all common outer diameters, both single and multiple shielded. Furthermore, our RG coaxial cables are manufactured according to the specifications of MIL C-17. Usage HF coaxial cable (radio, measurement technology) CPR/DOP Eca Construction Photo Colours and design may differ from the picture Inner conductor dimensions (mm) 2.70 ± 0.05 Inner Conductor material Cu bare Insulation dimensions (mm) 9.40 ± 0.25 Insulation material PE 1. Outer Conductor dimensions (mm) 10.20 1. Outer Conductor material Cu braid bare 1. Outer Conductor opt. coverage (%) 87 2. Outer conductor material Cu braid bare 2. Outer conductor opt. coverage (%) 84 Jacket dimensions (mm) 13.80 ± 0.25 Jacket material PVC black Construction Number 940137 Electrical Properties Characteristic impedance (Ω) 50 ± 2 Attenuation at 1 MHZ (db/100m) 0,4 Attenuation at 10 MHZ (db/100m) 0,7 Attenuation at 20 MHZ (db/100m) 1,9 Attenuation at 50 MHZ (db/100m) 3,1 Attenuation at 100 MHZ (db/100m) 4,6 Attenuation at 200 MHZ (db/100m) 7,0 Attenuation at 500 MHZ (db/100m) 12,3 Attenuation at 1000 MHZ (db/100m) 19,3 Attenuation at 2000 MHZ (db/100m) 31,2 Attenuation at 3000 MHZ (db/100m) 41,5 Velocity ratio (v/c) 0,66 DC resistance inner conductor (Ω/km) < 3.3 DC resistance outer conductor (Ω/km) < 2.2 Capacitance approx. (pF/m) 101 Max. operating voltage (kV DC) 5,8 Mechanical Properties Max. tensile strength (N) 775 Operating temperature range (°C) -20 / +70 Heat of combustion (kWh/m) 1,29 Installation temperature range (°C) -5 / +55 Storage temperature range (°C) -20 / +70 UV-resistance Very good Min. bending radius (dynamic) (mm) 138 Min. bending radius (static) (mm) 69 Weight 0,29 kg/m Learn More€11.42 (alv 0%)RG217BE
-
RG316-kaapeli 50 Ohm 0,51/1,97mm ø2,50mm, Teflon FEP -55/+200°C
RG 316-FEP bn transp 100m reel RG cables are now internationally established as a standard and are used in all areas of electronics, especially in measurement, radio and information technology. Our 50 Ohm coaxial cables are available in all common outer diameters, both single and multiple shielded. Furthermore, our RG coaxial cables are manufactured according to the specifications of MIL C-17. Learn More€4.06 (alv 0%)RG316
-
RG303-kaapeli 50 ohm 0,9/3,50mm Ø4,32mm Teflon FEP -55-+200°C
Bda Connectivity - RG303 - 50 Ohm hopeoitu RG-kaapeli FEP-vaipalla RG-kaapelit ovat nykyisin kansainvälisesti vakiintuneita ja niitä käytetään kaikilla elektroniikan alueilla, erityisesti mittauksessa, radio- ja tietotekniikassa. 50 ohmin koaksiaalikaapeleita on saatavana kaikilla tavallisilla ulkohalkaisijoilla ja yksittäis- että monisuojattuna. Lisäksi Bda:n RG-koaksiaalikaapelit valmistetaan MIL C-17:n määrittelyn mukaisesti. Valmistus Saksassa. RG303 on korkean lämpötilan kestävä halogeenivapaa koaksiaalikaapeli, sovellukset mm. radio ja mittaustekniikkaa. UV-kestävä. Tekniset tiedot: Sisäjohdin 0,9mm hopeoitu kuparilanka Eriste FEP 2,95mm Suojaus punottu hopeoitu kuparipalmikko, punos 95% Ulkojohdin 3,50mm Ulkohalkaisija FEP 4,32 Ø mm Impedanssi 50 Ω Sisäjohdinresistenssi < 28 Ω / km Ulkojohdinresistenssi < 20 Ω / km Kapasitanssi 98 pF / m Käyttölämpötila -55...+200 °C Minimi taivutusäde asennus/kiinteä 50/25 mm Paino 0,044 kg/m Learn More€5.62 (alv 0%)RG303
-
Antennikaap 50ohm Aircell5 FRNC HEATEX ø5,0mm 102m kela Cca
Aircell 5 Heatex is a five millimeters thin, flexible coaxial cable for the frequency range up to 10 GHz. The very low attenuation in relation to the diameter and the alternative usability of standard RG-58 coaxial connectors make this cable the first choice not only for wireless LAN but for many applications in telecommunications. The relatively low attenuation of Aircell 5 Heatex is achieved by a low-loss PE-LLC dielectric with a gas content of over 70%. The material is also resistant to moisture. The solid core conductor of Aircell 5 Heatex is drawn from low-oxygen copper (OFC). In order to achieve good shielding and low losses, the external conductor of Aircell 5 Heatex is made of two layers of copper: on a thin, overlapping copper foil, a shielding braid with a coverage of 70% is applied. The film is PE-coated on the inside and thus protected against cracking if the bending radius is too small. The jacket of the cable is made of a halogen-free and flame retardant copolymer. Due to this Heatex jacket, the cable has a low fire load, low flame propagation, limited smoke emission and reduced production of toxic and corrosive gases. With the fire protection rating Cca Aircell 5 Heatex is approved for installation in public buildings. Aircell 5 Heatex is certified for railway applications for interior and exterior use according to requirement sets R15 and R16 of the EN45545-2 standard. Due to its outer diameter of 5 mm, the Aircell 5 Heatex can be used with almost all commercially available coaxial connectors for 5 mm coaxial cables. Aircell 5 Heatex is a modern coaxial cable for many applications in telecommunications: it is relatively flexible, low-attenuation and anti-radiation. Characteristics: Diameter 5.0 ± 0.2 mm Impedance 50 ± 2 Ω Attenuation at 1 GHz / 100 m 29.54 dB f max 10 GHz Euroclass acc. to EN 50575 Cca Learn More€2.79 (alv 0%)AIRCELL5FRNC
-
Eupen 1/2 kaapeli FRNC Hi Flex 5092 Ø 13,6 mm, 50ohm, B2ca
Vs. Draka 1/2-50 BHF Learn More€6.64 (alv 0%)EC4-50-HF-FRB