My Cart

0 item(s)

Kaapelit RF

Grid  List 

10 Item(s)

Set Ascending Direction
  1. Antennikaap 50ohm SeaTex 15 SHF2 HF ø14,6mm 505m kela
  2. Antennikaap 50ohm SeaTex 10 SHF2 HF ø10,2mm 505m kela
  3. Antennikaap 50ohm SeaTex 7 SHF2 HF ø7,3mm 505m kela
  4. Antennikaap 50ohm SeaTex 5 SHF2 HF ø5mm 505m kela

    Antennikaap 50ohm SeaTex 5 SHF2 HF ø5mm 505m kela

    SeaTex 5 on erityisesti merenkulkuun suunniteltu matala-häviöinen, halogeeniton ja erittäin taipuisa koaksiaalikaapeli. Se omaa maailmanlaatuisen SHF-alustenrakennushyväksynnän (DNV GL -sertifikaatin) ja soveltuu käytettäväksi laivoilla, öljyalustoilla, porauslautoilla ja tuuliturbiineilla. SeaTex 5:n ulkokuori on valmistettu erityisestä termoplastisesta kopolymeeristä (SHF2), mikä antaa kaapelille korkean vastustuskyvyn kuumuutta, kylmyyttä, öljyjä, suolavettä, UV-säteilyä ja sääolosuhteita vastaan ja takaa pitkän käyttöiän vaativissa ympäristöissä. SeaTex 5:n suunnittelu perustuu vakiintuneeseen Aircell 5:een. Se tarjoaa erinomaiset vaimennusarvot, ja sen taipuisuus ja pieni taivutussäde mahdollistavat asennuksen ahtaimpiinkin tiloihin. Näin ollen SeaTex 5 yhdistää Ecoflex-koaksiaalikaapeleiden edut korkean meren vaatimuksiin. Tuote on määritetty jopa 10 GHz asti ja voidaan käyttää lämpötila-alueella -55–85 °C. Ominaisuudet: Halkaisija 5,0 ± 0,2 mm Impedanssi 50 ± 2 Ω Vaimennus 1 GHz:ssä / 100 m 31,09 dB Maksimitaajuus 10 GHz Tekniset tiedot: Sisäjohtimen materiaali: paljas kuparilanka Sisäjohtimen halkaisija: Ø 1 x 1,13 mm Eriste: vaahtoava polyeteeni (PE) ulkopuolisella kuorella PE halkaisija: Ø 3,1 mm Ulompi suojus 1: kuparifolio 100% peitto Ulompi suojus 2: paljaiden kuparilankojen punos, peitto: 70% Ulomman johtimen halkaisija: Ø 3,7 mm Kuori: termoplastinen kopolymeeri (SHF2), musta Paino: 36 kg/km Min. Taivutussäde: 4XØ yksittäinen, 8XØ toistuva Lämpötila-alue: -55 - +85 °C kuljetus ja kiinteä asennus, -40 - +85 °C joustava käyttö Vetolujuus: 100 N Learn More
    €5.46 (alv 0%)

    SEATEX05505

  5. Antennikaap 50ohm Aircell7 6GHz ø7,3mm 505m kela Eca

    Antennikaap 50ohm Aircell7 6GHz ø7,3mm 505m kela Eca

    Aircell 7 is a highly flexible coaxial cable for the frequency range up to 6 GHz. The very low damping in relation to the diameter and the small bending radius make the application interesting and recommendable for many applications in high-frequency technology. The low attenuation of Aircell 7 is achieved by a low-loss PE-LLC dielectric with a gas content of over 70%. The material is also resistant to moisture. The inner conductor, a 19-conductor strand of low-oxygen copper, allows the extraordinary flexibility of the cable. To achieve good attenuation, the Aircell 7 outer conductor is double-layered: on a thin, overlapping copper foil, a copper shielding braid with a degree of coverage of 85% is applied. The film is PE-coated on the inside and thus protected against cracking if the bending radius is too small. The black PVC outer jacket of Aircell 7 is UV-stabilized. Aircell 7 is a modern and widely used coaxial cable for numerous applications: it is extremely flexible, low-attenuation and anti-radiation. Specifications Diameter 7.3 ± 0.2 mm Impedance 50 ± 2 Ω Attenuation at 1 GHz / 100 m 20.44 dB f max 6 GHz Learn More
    €2.89 (alv 0%)

    AIRCELL7505

  6. Antennikaap 50ohm Aircell5 10GHz ø5,0mm 505m kela Eca

    Antennikaap 50ohm Aircell5 10GHz ø5,0mm 505m kela Eca

    Aircell 5 is a five millimeter thin, flexible coaxial cable for the frequency range up to 10 GHz. The very low attenuation in relation to the diameter and the alternative usability of standard RG-58 coaxial connectors make this cable the first choice not only for wireless LAN but for many applications in telecommunications. The relatively low attenuation of Aircell 5 is achieved by a low-loss PE-LLC dielectric with a gas content of over 70%. The material is also resistant to moisture. The solid core conductor of Aircell 5 is drawn from low-oxygen copper (OFC). In order to achieve good shielding and low losses, the Aircell 5 outer conductor is made of two layers of copper: on a thin, overlapping copper foil, a shielding layer with a degree of coverage of 70% is applied. The film is PE-coated on the inside and thus protected against cracking if the bending radius is too small. The black PVC outer jacket of Aircell 5 is UV-stabilized. Due to its outer diameter of 5 mm, Aircell 5 can be used with almost all commercially available coaxial connectors for 5 mm coaxial cables. Aircell 5 is a modern coax cable for many applications in telecommunications: it is relatively flexible, low-attenuation and anti-radiation. Specifications Diameter 5.0 ± 0.2 mm Impedance 50 ± 2 Ω Attenuation at 1 GHz / 100 m 29.54 dB f max 10 GHz Learn More
    €1.72 (alv 0%)

    AIRCELL5505

  7. Antennikaap 50ohm Aircom Premium 12GHz ø10,2mm 505m kela Eca

    Antennikaap 50ohm Aircom Premium 12GHz ø10,2mm 505m kela Eca

    Aircom Premium is an ultra-low-loss coaxial cable with an upper limit frequency of 12 GHz. It is characterized by a very low weight and a very low attenuation. The high-precision shaped aluminum inner conductor is enclosed by a copper foil, which is applied to the inner conductor and welded there. The skin effect ensures a high-performance RF line. The precise formability of the aluminum core is responsible for almost no defects in the entire frequency range. In addition, the new cable of the Aircom family is most suitable for digital modulation methods, as it is very low in intermodulation. The extremely low damping of Aircom Premium is achieved by a low-loss PE dielectric. The material is also resistant to moisture. In order to achieve good shielding with low losses, the outer conductor of the Aircom Premium is made of two layers of copper: on a thin, overlapping copper foil, a shielding braid with a coverage of 75% is applied. The film is PE-coated on the inside and thus protected against crack formation with a single too small bending radius. The black PVC outer jacket of the Aircom Premium is UV-stabilized. Aircom Premium is a coaxial cable for most applications in the news and radio technology: it is flexible, low-attenuation and anti-radiation. Specifications Diameter 10.2 ± 0.2 mm Impedance 50 ± 2 Ω Attenuation at 1 GHz / 100 m 11.88 dB f max 12 GHz Learn More
    €9.02 (alv 0%)

    AIRC10505

  8. RG215-kaapeli 50ohm 7x0,75/7,24 8,1/10,30 Ø11,1mm ARM PVC Fca

    RG215-kaapeli 50ohm 7x0,75/7,24 8,1/10,30 Ø11,1mm ARM PVC Fca

    Description RG cables are now internationally established as a standard and are used in all areas of electronics, especially in measurement, radio and information technology. Our 50 Ohm coaxial cables are available in all common outer diameters, both single and multiple shielded. Furthermore, our RG coaxial cables are manufactured according to the specifications of MIL C-17. Usage HF coaxial cable (radio, measurement technology) CPR/DOP n.s. Construction Photo Colours and design may differ from the picture Inner conductor dimensions (mm) 7 x 0,75 Inner Conductor material Cub Insulation dimensions (mm) 7,24 Insulation material LD-PE 1. Outer Conductor dimensions (mm) 8,1 1. Outer Conductor material CuGb 1. Outer Conductor opt. coverage (%) 94 Intermediate jacket dimensions (mm) 10,00 ± 0,20 Intermediate jacket material PVC black Jacket dimensions (mm) 10,30 Armouring dimensions (mm) 11,1 Armouring material galvanized Iron wire Armouring opt. coverage (%) 91 Construction Number 911089 Electrical Properties Characteristic impedance (Ω) 50+-2 Attenuation at 1 MHZ (db/100m) 0,5 Attenuation at 10 MHZ (db/100m) 2,0 Attenuation at 20 MHZ (db/100m) 2,9 Attenuation at 50 MHZ (db/100m) 4,7 Attenuation at 100 MHZ (db/100m) 6,8 Attenuation at 200 MHZ (db/100m) 10,1 Attenuation at 500 MHZ (db/100m) 17,1 Attenuation at 1000 MHZ (db/100m) 26,2 Attenuation at 2000 MHZ (db/100m) n.s Attenuation at 3000 MHZ (db/100m) n.s Velocity ratio (v/c) 0,66 DC resistance inner conductor (Ω/km) 5,5 DC resistance outer conductor (Ω/km) 4,5 Capacitance approx. (pF/m) 101 Max. operating voltage (kV DC) 3,7 Loop resistance (mΩ / m) < 10 Test voltage AC (kV AC) 2 (1 Std. / 1 h) Mechanical Properties Max. tensile strength (N) 1500 Operating temperature range (°C) -25 / +70 Heat of combustion (kWh/m) 1,18 UV-resistance Very good Min. bending radius (dynamic) (mm) 70 Min. bending radius (static) (mm) 67 Direct burial Ja Weight 0,285 kg/m Learn More
    €7.33 (alv 0%)

    RG215

  9. Antennikaap 50ohm Ecoflex15 PLUS HEATEX HF ø14,6mm 102m kela Cca

    Antennikaap 50ohm Ecoflex15 PLUS HEATEX HF ø14,6mm 102m kela Cca

    Ecoflex 15 Plus Heatex is a halogen-free and flame-retardant coaxial cable for use in buildings, plants, ships and hazardous areas. The strong increase in demand for low-loss cables, which meet all the relevant requirements with regard to flame retardancy and low emissions in the event of fire, led to the development of the Ecoflex cables with Heatex jacket. Ecoflex cables with Heatex sheaths are flame retardant and have a low fire propagation. Heatex coats are low in smoke, the escape routes remain visible in case of fire. Heatex coats are halogen-free and contain no reactive elements such as fluorine, chlorine and bromine. They do not produce corrosive gases which can lead to high property damage. By contrast, standard coaxial cables with a PVC sheath are not halogen-free and therefore can not be used in hazardous areas. Critical to PVC cables is also the possible transmission of the flames in case of fire - a danger that exclude Ecoflex Heatex cables safely. The UV stability of the durable Heatex jacket also allows unrestricted outdoor use. Ecoflex 15 Plus Heatex has a 7-core hybrid core conductor with aluminum core and welded copper sheath. The surface finish and the corresponding HF properties are significantly better than those of conventional copper strands. Another advantage is the double shielding: an overlapping copper foil and an overlying copper braid ensure a high shielding factor of > 90 dB at 1 GHz. With the fire protection rating Cca Ecoflex 15 Plus Heatex is approved for installation in public buildings. Ecoflex 15 Plus Heatex is certified for railway applications for interior and exterior use according to requirement sets R15 and R16 of the EN45545-2 standard. Specifications Diameter 14,6 ± 0,3 mm Impedance 50 ± 2 Ω Attenuation at 1 GHz / 100 m 9.80 dB f max 8 GHz Euroclass acc. to EN 50575 Cca Learn More
    €9.62 (alv 0%)

    EFL15PHX

  10. Antennikaap 50ohm Ecoflex15 PLUS HEATEX HF ø14,6mm 505m kela Cca

    Antennikaap 50ohm Ecoflex15 PLUS HEATEX HF ø14,6mm 505m kela Cca

    Ecoflex 15 Plus Heatex is a halogen-free and flame-retardant coaxial cable for use in buildings, plants, ships and hazardous areas. The strong increase in demand for low-loss cables, which meet all the relevant requirements with regard to flame retardancy and low emissions in the event of fire, led to the development of the Ecoflex cables with Heatex jacket. Ecoflex cables with Heatex sheaths are flame retardant and have a low fire propagation. Heatex coats are low in smoke, the escape routes remain visible in case of fire. Heatex coats are halogen-free and contain no reactive elements such as fluorine, chlorine and bromine. They do not produce corrosive gases which can lead to high property damage. By contrast, standard coaxial cables with a PVC sheath are not halogen-free and therefore can not be used in hazardous areas. Critical to PVC cables is also the possible transmission of the flames in case of fire - a danger that exclude Ecoflex Heatex cables safely. The UV stability of the durable Heatex jacket also allows unrestricted outdoor use. Ecoflex 15 Plus Heatex has a 7-core hybrid core conductor with aluminum core and welded copper sheath. The surface finish and the corresponding HF properties are significantly better than those of conventional copper strands. Another advantage is the double shielding: an overlapping copper foil and an overlying copper braid ensure a high shielding factor of > 90 dB at 1 GHz. With the fire protection rating Cca Ecoflex 15 Plus Heatex is approved for installation in public buildings. Ecoflex 15 Plus Heatex is certified for railway applications for interior and exterior use according to requirement sets R15 and R16 of the EN45545-2 standard. Specifications Diameter 14,6 ± 0,3 mm Impedance 50 ± 2 Ω Attenuation at 1 GHz / 100 m 9.80 dB f max 8 GHz Euroclass acc. to EN 50575 Cca Learn More
    €9.62 (alv 0%)

    EFL15PHX505

Grid  List 

10 Item(s)

Set Ascending Direction