Kaapelit
-
RG223-kaapeli 50 Ohm 0,9/4,03mm Ø5,38mm Hopeoitu 1GHz@49dB Eca
RG-kaapelit ovat nykyisin kansainvälisesti vakiintuneita ja niitä käytetään kaikilla elektroniikan alueilla, erityisesti mittauksessa, radio- ja tietotekniikassa. 50 ohmin koaksiaalikaapeleita on saatavana kaikilla tavallisilla ulkohalkaisijoilla, sekä yksittäisinä että monisuojatuina. Lisäksi Bda:n RG-koaksiaalikaapelit valmistetaan MIL C-17:n määrittelyn mukaisesti. Valmistus Saksassa. Kaapelin käyttöä voidaan soveltaa antennien liittämiseen ja liitosjohtoihin muun muuassa: WLAN, GPS, matkapuhelin, autopuhelin, verkkoyhteys laitteille... Lisäksi CCTV-asennuksiin, ohjausvideokameroihin ja videovalvontaan. UV-suojattu. Tekniset tiedot: Sisäjohdin 0,9mm Eriste LD-PE 2,95 Ø mm Suojaus 2x punottu hopeoitu kuparipalmikko, punos 95% & 94% Ulkojohdin 4,03 Ø mm Ulkohalkaisija 5,38 Ø mm Impedanssi 50 Ω Sisäjohdinresistenssi 27 Ω / km Ulkojohdinresistenssi 9 Ω / km Kapasitanssi 101 pF / m Käyttölämpötila -20...+70 °C Minimi taivutusäde asennus/kiinteä 50/25 mm Paino ~0,055 kg/m Vaimennukset: 1 MHZ (db/100m) 1,2 10 MHZ (db/100m) 4,0 20 MHZ (db/100m) 5,8 50 MHZ (db/100m) 9,3 100 MHZ (db/100m) 13,5 200 MHZ (db/100m) 19,7 500 MHZ (db/100m) 32,8 1000 MHZ (db/100m) 49 2000 MHZ (db/100m) 74,6 3000 MHZ (db/100m) 96,3 Learn More€3.29 (alv 0%)RG223BE
-
-
-
-
-
Antennikaap 50ohm SeaTex 5 SHF2 HF ø5mm 505m kela
SeaTex 5 on erityisesti merenkulkuun suunniteltu matala-häviöinen, halogeeniton ja erittäin taipuisa koaksiaalikaapeli. Se omaa maailmanlaatuisen SHF-alustenrakennushyväksynnän (DNV GL -sertifikaatin) ja soveltuu käytettäväksi laivoilla, öljyalustoilla, porauslautoilla ja tuuliturbiineilla. SeaTex 5:n ulkokuori on valmistettu erityisestä termoplastisesta kopolymeeristä (SHF2), mikä antaa kaapelille korkean vastustuskyvyn kuumuutta, kylmyyttä, öljyjä, suolavettä, UV-säteilyä ja sääolosuhteita vastaan ja takaa pitkän käyttöiän vaativissa ympäristöissä. SeaTex 5:n suunnittelu perustuu vakiintuneeseen Aircell 5:een. Se tarjoaa erinomaiset vaimennusarvot, ja sen taipuisuus ja pieni taivutussäde mahdollistavat asennuksen ahtaimpiinkin tiloihin. Näin ollen SeaTex 5 yhdistää Ecoflex-koaksiaalikaapeleiden edut korkean meren vaatimuksiin. Tuote on määritetty jopa 10 GHz asti ja voidaan käyttää lämpötila-alueella -55–85 °C. Ominaisuudet: Halkaisija 5,0 ± 0,2 mm Impedanssi 50 ± 2 Ω Vaimennus 1 GHz:ssä / 100 m 31,09 dB Maksimitaajuus 10 GHz Tekniset tiedot: Sisäjohtimen materiaali: paljas kuparilanka Sisäjohtimen halkaisija: Ø 1 x 1,13 mm Eriste: vaahtoava polyeteeni (PE) ulkopuolisella kuorella PE halkaisija: Ø 3,1 mm Ulompi suojus 1: kuparifolio 100% peitto Ulompi suojus 2: paljaiden kuparilankojen punos, peitto: 70% Ulomman johtimen halkaisija: Ø 3,7 mm Kuori: termoplastinen kopolymeeri (SHF2), musta Paino: 36 kg/km Min. Taivutussäde: 4XØ yksittäinen, 8XØ toistuva Lämpötila-alue: -55 - +85 °C kuljetus ja kiinteä asennus, -40 - +85 °C joustava käyttö Vetolujuus: 100 N Learn More€5.46 (alv 0%)SEATEX05505
-
RG22-kaapeli 95ohm parikaapeli 2x7x0,4/2,29/7,24/8,7 Ø10,67mm
Description Our symmetrical RG cables, also called twinaxial cables. Optimized with regard to electrical or mechanical tolerances, special environmental conditions and robustness, these RG cables are today internationally used standards. They are used in all areas of electronics, especially in measurement and radio technology as well as information technology. Furthermore, our RG coaxial cables are manufactured according to the specifications of MIL C-17. Usage Data cable CPR/DOP n.s. Construction Photo Colours and design may differ from the picture Number of cores 2 Inner conductor dimensions (mm) 2x 7x 0,40 Inner Conductor material 1. Cu bare / 2. Cu tinned Insulation dimensions (mm) 2,29 Insulation material LD-PE 1. Outer Conductor dimensions (mm) 8,7 1. Outer Conductor material 2x Cu braid tinned 1. Outer Conductor opt. coverage (%) 96 / 97 2. Insulation material LD-PE 2. Insulation dimensions (mm) 7,24 Jacket material PVC black Jacket dimensions (mm) 10,67 ± 0,25 Construction Number 930080 Electrical Properties Characteristic impedance (Ω) 95 ± 5 Attenuation at 1 MHZ (db/100m) 1,5 Attenuation at 10 MHZ (db/100m) 4,6 Attenuation at 20 MHZ (db/100m) 6,2 Attenuation at 50 MHZ (db/100m) 9,1 Attenuation at 100 MHZ (db/100m) 11,6 Attenuation at 200 MHZ (db/100m) 14,0 Velocity ratio (v/c) 0,66 DC resistance inner conductor (Ω/km) 19 DC resistance outer conductor (Ω/km) 3 Capacitance approx. (pF/m) 58 Operating voltage (V) 750 Mechanical Properties Operating temperature range (°C) -25 / +70 Heat of combustion (kWh/m) 0,76 Max. tensile strength (N) 600 Min. bending radius (dynamic) (mm) 100 Min. bending radius (static) (mm) 50 Weight 0,188 kg/m Other CE LVD VDE LVD EN n.a. NSR/LVD NSR/LVD 2014/35/EU Learn More€3.96 (alv 0%)RG22
-
Antennikaap 50ohm Aircell5 10GHz ø5,0mm 102m kela Eca
Aircell 5 is a five millimeter thin, flexible coaxial cable for the frequency range up to 10 GHz. The very low attenuation in relation to the diameter and the alternative usability of standard RG-58 coaxial connectors make this cable the first choice not only for wireless LAN but for many applications in telecommunications. The relatively low attenuation of Aircell 5 is achieved by a low-loss PE-LLC dielectric with a gas content of over 70%. The material is also resistant to moisture. The solid core conductor of Aircell 5 is drawn from low-oxygen copper (OFC). In order to achieve good shielding and low losses, the Aircell 5 outer conductor is made of two layers of copper: on a thin, overlapping copper foil, a shielding layer with a degree of coverage of 70% is applied. The film is PE-coated on the inside and thus protected against cracking if the bending radius is too small. The black PVC outer jacket of Aircell 5 is UV-stabilized. Due to its outer diameter of 5 mm, Aircell 5 can be used with almost all commercially available coaxial connectors for 5 mm coaxial cables. Aircell 5 is a modern coax cable for many applications in telecommunications: it is relatively flexible, low-attenuation and anti-radiation. Diameter 5.0 ± 0.2 mm Impedance 50 ± 2 Ω Attenuation at 1 GHz / 100 m 29.54 dB f max 10 GHz Learn More€1.72 (alv 0%)AIRCELL5
-
Antennikaap 50ohm Aircell7 6GHz ø7,3mm 505m kela Eca
Aircell 7 is a highly flexible coaxial cable for the frequency range up to 6 GHz. The very low damping in relation to the diameter and the small bending radius make the application interesting and recommendable for many applications in high-frequency technology. The low attenuation of Aircell 7 is achieved by a low-loss PE-LLC dielectric with a gas content of over 70%. The material is also resistant to moisture. The inner conductor, a 19-conductor strand of low-oxygen copper, allows the extraordinary flexibility of the cable. To achieve good attenuation, the Aircell 7 outer conductor is double-layered: on a thin, overlapping copper foil, a copper shielding braid with a degree of coverage of 85% is applied. The film is PE-coated on the inside and thus protected against cracking if the bending radius is too small. The black PVC outer jacket of Aircell 7 is UV-stabilized. Aircell 7 is a modern and widely used coaxial cable for numerous applications: it is extremely flexible, low-attenuation and anti-radiation. Specifications Diameter 7.3 ± 0.2 mm Impedance 50 ± 2 Ω Attenuation at 1 GHz / 100 m 20.44 dB f max 6 GHz Learn More€2.89 (alv 0%)AIRCELL7505
-
Antennikaap 50ohm Aircell5 10GHz ø5,0mm 505m kela Eca
Aircell 5 is a five millimeter thin, flexible coaxial cable for the frequency range up to 10 GHz. The very low attenuation in relation to the diameter and the alternative usability of standard RG-58 coaxial connectors make this cable the first choice not only for wireless LAN but for many applications in telecommunications. The relatively low attenuation of Aircell 5 is achieved by a low-loss PE-LLC dielectric with a gas content of over 70%. The material is also resistant to moisture. The solid core conductor of Aircell 5 is drawn from low-oxygen copper (OFC). In order to achieve good shielding and low losses, the Aircell 5 outer conductor is made of two layers of copper: on a thin, overlapping copper foil, a shielding layer with a degree of coverage of 70% is applied. The film is PE-coated on the inside and thus protected against cracking if the bending radius is too small. The black PVC outer jacket of Aircell 5 is UV-stabilized. Due to its outer diameter of 5 mm, Aircell 5 can be used with almost all commercially available coaxial connectors for 5 mm coaxial cables. Aircell 5 is a modern coax cable for many applications in telecommunications: it is relatively flexible, low-attenuation and anti-radiation. Specifications Diameter 5.0 ± 0.2 mm Impedance 50 ± 2 Ω Attenuation at 1 GHz / 100 m 29.54 dB f max 10 GHz Learn More€1.72 (alv 0%)AIRCELL5505
-
-
Antennikaap 50ohm Aircom Premium 12GHz ø10,2mm 505m kela Eca
Aircom Premium is an ultra-low-loss coaxial cable with an upper limit frequency of 12 GHz. It is characterized by a very low weight and a very low attenuation. The high-precision shaped aluminum inner conductor is enclosed by a copper foil, which is applied to the inner conductor and welded there. The skin effect ensures a high-performance RF line. The precise formability of the aluminum core is responsible for almost no defects in the entire frequency range. In addition, the new cable of the Aircom family is most suitable for digital modulation methods, as it is very low in intermodulation. The extremely low damping of Aircom Premium is achieved by a low-loss PE dielectric. The material is also resistant to moisture. In order to achieve good shielding with low losses, the outer conductor of the Aircom Premium is made of two layers of copper: on a thin, overlapping copper foil, a shielding braid with a coverage of 75% is applied. The film is PE-coated on the inside and thus protected against crack formation with a single too small bending radius. The black PVC outer jacket of the Aircom Premium is UV-stabilized. Aircom Premium is a coaxial cable for most applications in the news and radio technology: it is flexible, low-attenuation and anti-radiation. Specifications Diameter 10.2 ± 0.2 mm Impedance 50 ± 2 Ω Attenuation at 1 GHz / 100 m 11.88 dB f max 12 GHz Learn More€9.02 (alv 0%)AIRC10505
-
Antennikaap 50ohm Ecoflex15 PLUS HEATEX HF ø14,6mm 102m kela Cca
Ecoflex 15 Plus Heatex is a halogen-free and flame-retardant coaxial cable for use in buildings, plants, ships and hazardous areas. The strong increase in demand for low-loss cables, which meet all the relevant requirements with regard to flame retardancy and low emissions in the event of fire, led to the development of the Ecoflex cables with Heatex jacket. Ecoflex cables with Heatex sheaths are flame retardant and have a low fire propagation. Heatex coats are low in smoke, the escape routes remain visible in case of fire. Heatex coats are halogen-free and contain no reactive elements such as fluorine, chlorine and bromine. They do not produce corrosive gases which can lead to high property damage. By contrast, standard coaxial cables with a PVC sheath are not halogen-free and therefore can not be used in hazardous areas. Critical to PVC cables is also the possible transmission of the flames in case of fire - a danger that exclude Ecoflex Heatex cables safely. The UV stability of the durable Heatex jacket also allows unrestricted outdoor use. Ecoflex 15 Plus Heatex has a 7-core hybrid core conductor with aluminum core and welded copper sheath. The surface finish and the corresponding HF properties are significantly better than those of conventional copper strands. Another advantage is the double shielding: an overlapping copper foil and an overlying copper braid ensure a high shielding factor of > 90 dB at 1 GHz. With the fire protection rating Cca Ecoflex 15 Plus Heatex is approved for installation in public buildings. Ecoflex 15 Plus Heatex is certified for railway applications for interior and exterior use according to requirement sets R15 and R16 of the EN45545-2 standard. Specifications Diameter 14,6 ± 0,3 mm Impedance 50 ± 2 Ω Attenuation at 1 GHz / 100 m 9.80 dB f max 8 GHz Euroclass acc. to EN 50575 Cca Learn More€9.62 (alv 0%)EFL15PHX
-
1/2 antennikaapeli LSOH 50ohm 500m rulla, low smoke, Eca
Hansenin 1/2" tuuman 50 Ohm antennikaapeli Hansen 50ohmin korrugoidut koaksiaalikaapelisarjat soveltuvat laajasti antennisyöttöjärjestelmiin: Maa- ja matkapuhelin; jumpperijohdot; laitteiden huone- ja antenniliitännät; armeijan tiedonsiirtoyhteydet; VLF-, AM- ja FM-radiolähetysjärjestelmät; Ilma- ja laivatutkajärjestelmät; Taktiset, restaurointi- ja mobiilit viestintäjärjestelmät. Tekniset tiedot: Sisäjohdin: 4,8 mm Ulkohalkaisija: 13,8 mm Kuoren paksuus: 1,0 mm Kuoren halkaisija: 15,8 mm Paino: 240 kg/km Minimi taivutussäde: 70 mm CPR-luokka Eca Vaimennukset: Kts. datalehti liitteenä Learn More€4.50 (alv 0%)HA12HF
-
Antennikaap 50ohm Ø4,95 LMR200 vyyhti 200m 1800MHz/46,4dB Fca
Hansen RF200 on suorituskykyinen koaksiaalikaapeli erilaisissa 3G/4G RF-järjestelmäympäristöissä. Käy niin sisäjakeluun, lähetys-, tukiasema-, langaton matkapuhelin sovelluksiin. Matala VSWR ja erinomainen suojaustehokkuus vähentävät vaimennusta ja suojaa ulkoisista häiriöistä. Tekniset tiedot: - Johdin 1,12mm - Eriste 2,95mm - Halkaisija 4,95mm Vastaa: LMR200, CFD200 Learn More€1.30 (alv 0%)RF200
-
RG214-kaapeli 50 Ohm 2,25/8,68mm Ø10,80mm Hopeoitu, PVC, Eca
Bda Connectivity - RG214BE - 50 Ohm hopeoitu RG-kaapeli PVC-vaipalla, Eca Bda:n RG-kaapelit ovat nykyisin kansainvälisesti vakiintuneita ja niitä käytetään kaikilla elektroniikan alueilla, erityisesti mittauksessa, radio- ja tietotekniikassa. 50 ohmin koaksiaalikaapeleita on saatavana kaikilla tavallisilla ulkohalkaisijoilla, sekä yksittäis- että monisuojattuna. Lisäksi Bda:n RG-koaksiaalikaapelit valmistetaan MIL C-17:n määrittelyn mukaisesti. Valmistus Saksassa. Tekniset tiedot: Sisäjohdin 2,25mm 7x0,75mm hopeoidut kuparilangat Eriste LD-PE 7,24 Ø mm Suojaus 2x punottu hopeoitu kuparipalmikko, punos 95% / 98% Ulkojohdin 8,68 Ø mm Ulkohalkaisija 10,80 Ø mm Impedanssi 50 Ω Sisäjohdinresistenssi 5,5 Ω / km Ulkojohdinresistenssi 4,5 Ω / km Kapasitanssi 101 pF / m Käyttölämpötila -20...+70 °C Minimi taivutusäde asennus/kiinteä 100/50 mm Paino 0,204 kg/m Vaimennukset: 1 MHZ (db/100m) 0,9 10 MHZ (db/100m) 2,1 20 MHZ (db/100m) 3,0 50 MHZ (db/100m) 4,6 100 MHZ (db/100m) 7,2 200 MHZ (db/100m) 11,3 500 MHZ (db/100m) 16,2 1000 MHZ (db/100m) 28,6 2000 MHZ (db/100m) 41,9 3000 MHZ (db/100m) 51,7 Learn More€7.04 (alv 0%)RG214BE
-
RG215-kaapeli 50ohm 7x0,75/7,24 8,1/10,30 Ø11,1mm ARM PVC Fca
Description RG cables are now internationally established as a standard and are used in all areas of electronics, especially in measurement, radio and information technology. Our 50 Ohm coaxial cables are available in all common outer diameters, both single and multiple shielded. Furthermore, our RG coaxial cables are manufactured according to the specifications of MIL C-17. Usage HF coaxial cable (radio, measurement technology) CPR/DOP n.s. Construction Photo Colours and design may differ from the picture Inner conductor dimensions (mm) 7 x 0,75 Inner Conductor material Cub Insulation dimensions (mm) 7,24 Insulation material LD-PE 1. Outer Conductor dimensions (mm) 8,1 1. Outer Conductor material CuGb 1. Outer Conductor opt. coverage (%) 94 Intermediate jacket dimensions (mm) 10,00 ± 0,20 Intermediate jacket material PVC black Jacket dimensions (mm) 10,30 Armouring dimensions (mm) 11,1 Armouring material galvanized Iron wire Armouring opt. coverage (%) 91 Construction Number 911089 Electrical Properties Characteristic impedance (Ω) 50+-2 Attenuation at 1 MHZ (db/100m) 0,5 Attenuation at 10 MHZ (db/100m) 2,0 Attenuation at 20 MHZ (db/100m) 2,9 Attenuation at 50 MHZ (db/100m) 4,7 Attenuation at 100 MHZ (db/100m) 6,8 Attenuation at 200 MHZ (db/100m) 10,1 Attenuation at 500 MHZ (db/100m) 17,1 Attenuation at 1000 MHZ (db/100m) 26,2 Attenuation at 2000 MHZ (db/100m) n.s Attenuation at 3000 MHZ (db/100m) n.s Velocity ratio (v/c) 0,66 DC resistance inner conductor (Ω/km) 5,5 DC resistance outer conductor (Ω/km) 4,5 Capacitance approx. (pF/m) 101 Max. operating voltage (kV DC) 3,7 Loop resistance (mΩ / m) < 10 Test voltage AC (kV AC) 2 (1 Std. / 1 h) Mechanical Properties Max. tensile strength (N) 1500 Operating temperature range (°C) -25 / +70 Heat of combustion (kWh/m) 1,18 UV-resistance Very good Min. bending radius (dynamic) (mm) 70 Min. bending radius (static) (mm) 67 Direct burial Ja Weight 0,285 kg/m Learn More€7.33 (alv 0%)RG215
-
RG-kaapeli 50ohm 2,7/9,4/10,2mm Ø13,80mm MIL-C-17 PVC Eca
Description RG cables are now internationally established as a standard and are used in all areas of electronics, especially in measurement, radio and information technology. Our 50 Ohm coaxial cables are available in all common outer diameters, both single and multiple shielded. Furthermore, our RG coaxial cables are manufactured according to the specifications of MIL C-17. Usage HF coaxial cable (radio, measurement technology) CPR/DOP Eca Construction Photo Colours and design may differ from the picture Inner conductor dimensions (mm) 2.70 ± 0.05 Inner Conductor material Cu bare Insulation dimensions (mm) 9.40 ± 0.25 Insulation material PE 1. Outer Conductor dimensions (mm) 10.20 1. Outer Conductor material Cu braid bare 1. Outer Conductor opt. coverage (%) 87 2. Outer conductor material Cu braid bare 2. Outer conductor opt. coverage (%) 84 Jacket dimensions (mm) 13.80 ± 0.25 Jacket material PVC black Construction Number 940137 Electrical Properties Characteristic impedance (Ω) 50 ± 2 Attenuation at 1 MHZ (db/100m) 0,4 Attenuation at 10 MHZ (db/100m) 0,7 Attenuation at 20 MHZ (db/100m) 1,9 Attenuation at 50 MHZ (db/100m) 3,1 Attenuation at 100 MHZ (db/100m) 4,6 Attenuation at 200 MHZ (db/100m) 7,0 Attenuation at 500 MHZ (db/100m) 12,3 Attenuation at 1000 MHZ (db/100m) 19,3 Attenuation at 2000 MHZ (db/100m) 31,2 Attenuation at 3000 MHZ (db/100m) 41,5 Velocity ratio (v/c) 0,66 DC resistance inner conductor (Ω/km) < 3.3 DC resistance outer conductor (Ω/km) < 2.2 Capacitance approx. (pF/m) 101 Max. operating voltage (kV DC) 5,8 Mechanical Properties Max. tensile strength (N) 775 Operating temperature range (°C) -20 / +70 Heat of combustion (kWh/m) 1,29 Installation temperature range (°C) -5 / +55 Storage temperature range (°C) -20 / +70 UV-resistance Very good Min. bending radius (dynamic) (mm) 138 Min. bending radius (static) (mm) 69 Weight 0,29 kg/m Learn More€11.42 (alv 0%)RG217BE
-
Antennikaap 50ohm Aircell5 FRNC HEATEX ø5,0mm 102m kela Cca
Aircell 5 Heatex is a five millimeters thin, flexible coaxial cable for the frequency range up to 10 GHz. The very low attenuation in relation to the diameter and the alternative usability of standard RG-58 coaxial connectors make this cable the first choice not only for wireless LAN but for many applications in telecommunications. The relatively low attenuation of Aircell 5 Heatex is achieved by a low-loss PE-LLC dielectric with a gas content of over 70%. The material is also resistant to moisture. The solid core conductor of Aircell 5 Heatex is drawn from low-oxygen copper (OFC). In order to achieve good shielding and low losses, the external conductor of Aircell 5 Heatex is made of two layers of copper: on a thin, overlapping copper foil, a shielding braid with a coverage of 70% is applied. The film is PE-coated on the inside and thus protected against cracking if the bending radius is too small. The jacket of the cable is made of a halogen-free and flame retardant copolymer. Due to this Heatex jacket, the cable has a low fire load, low flame propagation, limited smoke emission and reduced production of toxic and corrosive gases. With the fire protection rating Cca Aircell 5 Heatex is approved for installation in public buildings. Aircell 5 Heatex is certified for railway applications for interior and exterior use according to requirement sets R15 and R16 of the EN45545-2 standard. Due to its outer diameter of 5 mm, the Aircell 5 Heatex can be used with almost all commercially available coaxial connectors for 5 mm coaxial cables. Aircell 5 Heatex is a modern coaxial cable for many applications in telecommunications: it is relatively flexible, low-attenuation and anti-radiation. Characteristics: Diameter 5.0 ± 0.2 mm Impedance 50 ± 2 Ω Attenuation at 1 GHz / 100 m 29.54 dB f max 10 GHz Euroclass acc. to EN 50575 Cca Learn More€2.79 (alv 0%)AIRCELL5FRNC
-
Antennikaap 50ohm Ø6,1 LMR240 vyyhti 200m 1800MHz/35,6dB Fca
Hansen RF240 on suorituskykyinen koaksiaalikaapeli erilaisissa 3G/4G RF-järjestelmäympäristöissä. Käy niin sisäjakeluun, lähetys-, tukiasema-, langaton matkapuhelin sovelluksiin. Matala VSWR ja erinomainen suojaustehokkuus vähentävät vaimennusta ja suojaa ulkoisista häiriöistä. Tekniset tiedot: Sisäjohdin 1,42mm Cu Eriste 3,81mm Ulkohalkaisija 6,10mm Vastaa LMR240 ja CFD240 kaapeleita Learn More€1.78 (alv 0%)RF240
-
-
Antennikaap 50ohm Ø10,3 LMR400 kela 200m 1800MHz/18,6dB Fca
Hansen RF400 on suorituskykyinen koaksiaalikaapeli erilaisissa 3G/4G RF-järjestelmäympäristöissä. Käy niin sisäjakeluun, lähetys-, tukiasema-, langaton matkapuhelin sovelluksiin. Matala VSWR ja erinomainen suojaustehokkuus vähentävät vaimennusta ja suojaa ulkoisista häiriöistä. Tekniset tiedot: - Johdin 2,74mm - Eriste 7,24mm - Halkaisija 10,29mm Vastaa LMR400 ja CFD400 kaapeleita Learn More€3.10 (alv 0%)RF400
-
Antennikaap 50ohm Ecoflex15 PLUS HEATEX HF ø14,6mm 505m kela Cca
Ecoflex 15 Plus Heatex is a halogen-free and flame-retardant coaxial cable for use in buildings, plants, ships and hazardous areas. The strong increase in demand for low-loss cables, which meet all the relevant requirements with regard to flame retardancy and low emissions in the event of fire, led to the development of the Ecoflex cables with Heatex jacket. Ecoflex cables with Heatex sheaths are flame retardant and have a low fire propagation. Heatex coats are low in smoke, the escape routes remain visible in case of fire. Heatex coats are halogen-free and contain no reactive elements such as fluorine, chlorine and bromine. They do not produce corrosive gases which can lead to high property damage. By contrast, standard coaxial cables with a PVC sheath are not halogen-free and therefore can not be used in hazardous areas. Critical to PVC cables is also the possible transmission of the flames in case of fire - a danger that exclude Ecoflex Heatex cables safely. The UV stability of the durable Heatex jacket also allows unrestricted outdoor use. Ecoflex 15 Plus Heatex has a 7-core hybrid core conductor with aluminum core and welded copper sheath. The surface finish and the corresponding HF properties are significantly better than those of conventional copper strands. Another advantage is the double shielding: an overlapping copper foil and an overlying copper braid ensure a high shielding factor of > 90 dB at 1 GHz. With the fire protection rating Cca Ecoflex 15 Plus Heatex is approved for installation in public buildings. Ecoflex 15 Plus Heatex is certified for railway applications for interior and exterior use according to requirement sets R15 and R16 of the EN45545-2 standard. Specifications Diameter 14,6 ± 0,3 mm Impedance 50 ± 2 Ω Attenuation at 1 GHz / 100 m 9.80 dB f max 8 GHz Euroclass acc. to EN 50575 Cca Learn More€9.62 (alv 0%)EFL15PHX505
-
Antennikaap 50ohm Ecoflex10 PLUS HEATEX HF ø10,2mm 505m kela Cca
Ecoflex 10 Plus Heatex is a halogen-free and flame-retardant coaxial cable for use in buildings, plants, ships and hazardous areas. The strong increase in demand for low-loss cables, which meet all the relevant requirements with regard to flame retardancy and low emissions in the event of fire, led to the development of the Ecoflex cables with Heatex jacket. Ecoflex cables with Heatex sheaths are flame retardant and have a low fire propagation. Heatex coats are low in smoke, the escape routes remain visible in case of fire. Heatex coats are halogen-free and contain no reactive elements such as fluorine, chlorine and bromine. They do not produce corrosive gases which can lead to high property damage. By contrast, standard coaxial cables with a PVC sheath are not halogen-free and therefore can not be used in hazardous areas. Critical to PVC cables is also the possible transmission of the flames in case of fire - a danger that exclude Ecoflex Heatex cables safely. The UV stability of the durable Heatex jacket also allows unrestricted outdoor use. Ecoflex 10 Plus Heatex has a 7-core hybrid core conductor with aluminum core and welded copper sheath. The surface finish and the corresponding HF properties are significantly better than those of conventional copper strands. Another advantage is the double shielding: an overlapping copper foil and an overlying copper braid ensure a high shielding factor of > 90 dB at 1 GHz. With the fire protection rating Cca Ecoflex 10 Plus Heatex is approved for installation in public buildings. Ecoflex 10 Plus Heatex is certified for railway applications for interior and exterior use according to requirement sets R15 and R16 of the EN45545-2 standard. Specifications Diameter 10.2 ± 0.2 mm Impedance 50 ± 2 Ω Attenuation at 1 GHz / 100 m 13.49 dB f max 8 GHz Euroclass acc. to EN 50575 Cca Learn More€5.72 (alv 0%)EFL10PHX505
-
RG223-kaapeli 50 Ohm 0,9/4mm Ø5,4mm Hopeoitu 1GHz@48,5dB Fca
Tasker RG223 - Hopeoidun koaksiaalikaapelin pääominaisuus on kaksinkertainen suojaus, mahdollistaa käytön meluisissa ympäristöissä. Sekä keskilanka että punotut kupari suojat ovat päällystetty hopealla, estävät näin hapettumisprosessin johtamisen lisäämisen lisäksi. Kaapeli soveltuu mainiosti lähetysantennien syöttökaapeliksi. Kaapelin käyttöä voidaan soveltaa antennien liittämiseen ja liitosjohtoihin muun muuassa: WLAN, GPS, matkapuhelin, autopuhelin, verkkoyhteys laitteille... Lisäksi CCTV-asennuksiin, ohjausvideokameroihin ja videovalvontaan. Tekniset tiedot: Musta PVC-vaippa. Ulko. Ø 5,40 (± 0,20) mm. Kaksinkertainen hopeoitu punottu suojaus 2x 98% Johdin: Ø 0,90 mm. hopeoitu kuparilanka Johdinresistanssi 28 Ω / km Kapasiteetti ydin/suoja 100 pF / m Käyttölämpötila -15 / + 70 ° C Kaapelissa merkinnät: tasker® RG 223 U MIL-C-17F 50 OHM DOUBLE SHIELD Made In Italy Learn More€3.15 (alv 0%)RG223
-
Antennikaap 50ohm Ecoflex10 PLUS HEATEX HF ø10,2mm 102m kela Cca
Ecoflex 10 Plus Heatex Ecoflex 10 Plus Heatex is a halogen-free and flame-retardant coaxial cable for use in buildings, plants, ships and hazardous areas. The strong increase in demand for low-loss cables, which meet all the relevant requirements with regard to flame retardancy and low emissions in the event of fire, led to the development of the Ecoflex cables with Heatex jacket. Ecoflex cables with Heatex sheaths are flame retardant and have a low fire propagation. Heatex coats are low in smoke, the escape routes remain visible in case of fire. Heatex coats are halogen-free and contain no reactive elements such as fluorine, chlorine and bromine. They do not produce corrosive gases which can lead to high property damage. By contrast, standard coaxial cables with a PVC sheath are not halogen-free and therefore can not be used in hazardous areas. Critical to PVC cables is also the possible transmission of the flames in case of fire - a danger that exclude Ecoflex Heatex cables safely. The UV stability of the durable Heatex jacket also allows unrestricted outdoor use. Ecoflex 10 Plus Heatex has a 7-core hybrid core conductor with aluminum core and welded copper sheath. The surface finish and the corresponding HF properties are significantly better than those of conventional copper strands. Another advantage is the double shielding: an overlapping copper foil and an overlying copper braid ensure a high shielding factor of > 90 dB at 1 GHz. With the fire protection rating Cca Ecoflex 10 Plus Heatex is approved for installation in public buildings. Ecoflex 10 Plus Heatex is certified for railway applications for interior and exterior use according to requirement sets R15 and R16 of the EN45545-2 standard. Learn More€5.72 (alv 0%)EFL10PHX
-
Antennikaap 50ohm Ecoflex5 6GHz ø5,5mm 102m kela Fca
Ecoflex 5 is a thin and extremely flexible coaxial cable designed for frequencies up to 6 GHz. Due to its low loss in relation to the outer diameter of 5,5 mm and the very small bending radius the cable can be used for numerous RF applications. The low attenuation values of Ecoflex 5 are achieved by using advanced manufacturing techniques and low loss PE-LLC dielectric with a foaming rate of more than 70%. This unique dielectric also offers water resistance and long term stability. The inner conductor of Ecoflex 5 contains 19 stranded bare copper wires with diameter of 0,287 mm each, manufatured from low oxygen copper (OFC). Such inner conductor structure provide the cable its remarkable flexibility. Further advantages of this cable include the use of double shielding which is constructed of overlapping 100 % tight copper foil and an additional shield braiding of bare copper wires with 80 % coverage. The copper foil has an applied PE coating which prevents foil cracking due to short radius bends. The black PVC jacket of Ecoflex 5 is UV-stabilized. Ecoflex 5 is an innovative coaxial cable, which is the right choice, when an extremely flexible, very low loss, and microwave rated cable is required. It can be used for numerous RF applications. Characteristics: Diameter 5.5 ± 0.2 mm Impedance 50 ± 2 Ω Attenuation at 1 GHz / 100 m 26.13 dB f max 6 GHz Learn More€2.01 (alv 0%)EFL5
-
Antennikaapeli 75ohm LSZH 3-suoj 500m 115dB Dca,s1,d2,a1
Wisi kolmoissuojattu antennikaapeli Learn More€0.77 (alv 0%)MK96L0500
-
RG59-kaapeli 75ohm 0,58/3,7mm ø6,3mm 2xSuojaus Harmaa PVC
RG 59 -75 Ohm koaksiaalikaapeli videolle. Musta ulkovaippa. Learn More€1.10 (alv 0%)RG59SP
-
HDSDI 12G 75ohm 1.0/4,8mm ø7,0mm Musta LSZH R142079770
Coaxial cables 75Ω for HDTV and HD SDI installations. This coaxial cable allows the transmission of HDTV signal on the maximum distances of 140 mt. Suitable for 75Ω HDTV-BNC 3GHz crimping type and N type connectors. Professional cable that can be applied in Broadcast and multi-coaxial installations of HDTV video directions and HD SDI video interfaces in recording and duplication cinematographic studios, conference rooms, airports, buildings, entertainment and sport structures. Learn More€2.70 (alv 0%)TSK1079
-
Koaksiaalikaapeli HDTV/HDSDI 75o 14AWG ø10,2mm PVC 1.6/7.2
Coaxial cables 75Ω for HDTV and HD SDI installations. This coaxial cable allows the transmission of HDTV signal on the maximum distances of 150÷200 mt. Suitable for 75Ω HDTV- 3GHz N type connectors. Professional cable that can be applied in Broadcast and multi-coaxial installations of HDTV video directions and HD SDI video interfaces on the external video mobile unit, in recording and duplication cinematographic studios, conference rooms, airports, theatres, concerts and other events, public buildings, entertainment and sport structures. Learn More€5.38 (alv 0%)TSK1080
-
Koaksiaalikaapeli HDTV/HDSDI 75o 0.8/3.7 ø6mm PVC R142079760
vastaava: Canare L-4CFB Belden 5105A Learn More€2.33 (alv 0%)TSK1078
-
Koakskaap HDSDI 75ohm vihr FRNC 1.6/7.2AF ø10,2mm Eca
Vastaava: Belden 1794A (FRNC) Learn More€3.59 (alv 0%)VD167SH
-
Koakskaap HDSDI 75ohm must PUR 0.8/3.7 DZ ø6,1mm 100m high flex
HD-SDI - high-flex video cable 0.8L/3.7 DZ - PUR VD083LP flexible stranded inner conductor very dense double tinned copper braid suitable for mobile HD-SDI use robust PUR jacket Learn More€4.17 (alv 0%)VD083LP
-
Koakskaap 3xHDSDI 75ohm FRNC 3x0.6/2.8AF ø4,5mm musta Eca
HD-SDI - multichannel video cable 3 x 0.6/2.8 AF - FRNC - Eca VD3062SH-E analog, high resolution RGB or 3 x digital video double shielding (100% foil + 90% braid) not suitable for mobile HD-SDI use flame retardant and non corrosive (FRNC) CPR class Eca acc. to EN50575 Learn More€6.13 (alv 0%)VD3062SH
-
Antennikaapeli 75ohm 3,6mm 2xSuojaus TELASS40 Eca
Double shielded coaxial house installation cable (antenna cable, CATV cable) with inner conductor made of copper for interference-free TV reception. The PVC jacket provides very good laying properties, weather and UV resistance. Learn More€0.42 (alv 0%)500310
-
-
Antennikaap 75ohm 15m ø6,7mm kelmupakkaus
Ø inside conductor 1,13 mm± 0.005 inside conductor bare copper dielectric PE/Gas Injected 4,8±0,1 mm 1° SCREEN-Foil AL/PET/AL 100% 2° SCREEN-Braid tinned copper 73% 3° SCREEN-Foil - antimigrating yes outer sheath-type PVC outer sheath-dimension Ø 6,7±0,15mm colour min. bending radius 30/60 mm weight 49 g/m "Twist on" F connector 80317 "Crimp on" F connector 80327 screening efficiency >95 dB Learn More€16.70 (alv 0%)80C15T
-
-
Koakskaap HDSDI 75ohm vihr FRNC 0.6/2.8AF Ø4.5 12G Eca
Klotz VD062SH - HDSDI koaksiaalikaapeli VD062SH on suunniteltu sekä digitaalisten että analogisten videosignaalien lähettämiseen ja sitä käytetään sekä laitteisto- että kiinteisiin asennuksiin. Sisäjohdin on paljas kuparilanka jonka halkaisija on 0,60 mm ja sitä ympäröi vaahdotettu PE-dielektrinen väliaine, joka varmistaa signaalin siirron ilman paluuhäviötä ja erittäin matalan vaimennuksen. Tyypilliset SMPTE-standardien mukaiset lähetysetäisyydet ovat 255 metriä SDI-videosignaaleille, 65 metriä 1,5 Gb / s HD-SDI-signaaleille ja 47 metriä 3 Gb / s signaaleille. Käytännössä pidemmät etäisyydet voivat kuitenkin olla mahdollisia käytetyistä laitteista riippuen. Tehokkaan suojan sähkömagneettisia häiriöitä vastaan tarjoaa kaksinkertainen suojaus, joka käsittää AL-kaksoiskomposiittikerroksen ja ultradensitiivisesti kudotun kuparisuojan, joka tarjoaa yli 92 prosentin suojauksen. Ulkovaippa on valmistettu FRNC-materiaalista, joka on paloa hidastava ja täysin halogeeniton. * Digitalinen & analooginen video * Tuplasuojaus - folio ja tiheä punos. * Ei sovellu mobiili HD-SDI käyttöön * Palamaton / syövyttämäton (FRNC) * CPR Eca acc. to EN50575 Tekniset tiedot: Sisäjohdin Ø 0.60 mm Eristys Vaahto PE Ø 2.8 mm Suojaus AL/PET/AL kaksoissuoja folio + erittäin tiheä punos (92% peitto) Kaapeli LSZH (low smoke zero halogen) vihreä Kokonaishalkaisija 4.5mm Käyttölämpötila -30 / +70celsius Minimi taivutussäde 25mm Impedanssi 75 Ohm Vaimennus db/100m 1 MHz: 1.2 5 MHz: 2.7 10 MHz: 3.8 100 MHz: 10.8 135 MHz: 12.4 200 MHz: 15.0 270 MHz: 17.5 500 MHz: 24.2 750 MHz: 29.6 1000 MHz: 34.7 1500 MHz: 42.6 3000 MHz: 61.7 Heijastusvaimennus: 30 - 300 MHz: > 25 dB 300 - 1500 MHz: > 23 dB 1500 - 3000 MHz: > 21 dB Learn More€1.32 (alv 0%)VD062SH