Ostoskori

0 tuotetta

Antennitarvikkeet

Taulukkona  Lista 

Tuotteet 1-40 / 50

Nouseva
Sivu:
  1. 1
  2. 2
  1. Jatkoskotelo Maa 2 lähtöä

    Jatkoskotelo Maa 2 lähtöä

    117,67 € (alv 0%)

    NC-412/2

  2. Seinäkiinnike 50mm seinästä Ø40-75mm, avattavat lenkkilaatat
  3. Piippukiinnike ø30-50mm putkelle galvanoitu, 2 elementtiä
  4. Piippukiinnike ø30-50mm putkelle galvanoitu panta NFK (ei sis.)
  5. Maataso 1m ø50mm 18x18 levy Yhteesopiva 438L15 kanssa

    Maataso 1m ø50mm 18x18 levy Yhteesopiva 438L15 kanssa

    A series of accessories to fix the mast of a TV or SAT antenna to the wall or to ground. The wall brackets are fixed by 2 dowels and differ from each other for the thickness of the plate, the hot or electro galvanizing and the length determining the mounting stand-off of the mast from the wall. The ground supports are plates endowed with clamp for the mast attack fixed to the ground. code 642 description Groundstand with 4-hole (ø 12 mm) 18 x 18 cm plate (thickness 3 mm) and 1 mt mast (thickness 1,5 mm) welded on the plate. stand-off Ø mast 50 mm finish ZB packing 1 use Suitable for fixing of masts for small diameter dishes, with anchor-bolts FVTC11, FVTC14, FVTC8 and FVTC1. Lue lisää...
    16,91 € (alv 0%)

    642

  6. Mastoputki teleskooppi 3x2m ø35-30-25mm, kuumasinkitty
  7. Vertikaalitanko ø30mm 50cm

    Vertikaalitanko ø30mm 50cm

    Accessories for the installation of TV antennas: ropes, tie rods, guy-rings and insulators allowing the best firmness of the antenna cable. Other accessories are brackets for the anchorage of masts for TV or SAT antennas and insulators for the fixing of cables onto the wall. code 418L finish ZF description size L = 50 cm packing 10 Lue lisää...
    7,43 € (alv 0%)

    418L

  8. Seinälenkki 50mm

    Seinälenkki 50mm

    Masto seinälenkki Ø50mm Lue lisää...
    3,00 € (alv 0%)

    412E

  9. Mastoputki 2m ø40mm jatkettava sähkösinkitty, toim. 6kpl erissä

    Mastoputki 2m ø40mm jatkettava sähkösinkitty, toim. 6kpl erissä

    Emme Esse - Mastoputki 437L2 Pituus 2.0 m Halkaisija 40 mm Seinämän paksuus 1.2 mm Mastohatulla varustettu Sähkösinkitetty 6kpl erissä pakkauksen paino 14,5 kg Lue lisää...
    14,66 € (alv 0%)

    437L2

  10. Seinälenkki 40mm

    Seinälenkki 40mm

    2,00 € (alv 0%)

    412C

  11. Mastoputken kiinnike ø20-40mm kuumasinkitty, 200mm seinästä
  12. Mastoputki 2m ø50mm 2,0mm sähkösinkitty 3kpl erissä

    Mastoputki 2m ø50mm 2,0mm sähkösinkitty 3kpl erissä

    Korvaa tuotteen 438L15 Lue lisää...
    16,72 € (alv 0%)

    80075GPZ

  13. Antennin kiinnike ø40mm galvan. seinästä 26cm
  14. Antennin kiinnike ø40mm galvan. seinästä 460 mm

    Antennin kiinnike ø40mm galvan. seinästä 460 mm

    These products are studied for the wall fixing of parabolic dishes. Composed of a bent tube welded on a plate with drills (round or square), they are offered in various versions differing for kind of plate and tube. Some of these items are hot galvanized (ZF), whereas the others are finished with electro-galvanizing (ZB). Thanks to their clamps, some of these supports can also be fixed on the mast. For the wall fixing of the support it is recommended to use the anchor-bolts described on page "Anchor-bolts for bracket and mount fixing". code 80099S description Bent tube welded on rectangular plate 15x20 cm, thickness 4 mm with holes Ø 12 mm. 40 mm length A + B 46 + 27 cm thickness 1.4 mm packing 3 use Suitable for the wall fixing of small and medium diameter dishes, with anchor-bolts code FVTC11 and FVTC14. Lue lisää...
    23,00 € (alv 0%)

    80099S

  15. Antennin kiinnike ø50mm galvan. seinästä 580 mm
  16. Antennin kiinnike ø35mm galvan. seinästä 250 mm korkeus 250mm

    Antennin kiinnike ø35mm galvan. seinästä 250 mm korkeus 250mm

    These products are studied for the wall fixing of parabolic dishes. Composed of a bent tube welded on a plate with drills (round or square), they are offered in various versions differing for kind of plate and tube. Some of these items are hot galvanized (ZF), whereas the others are finished with electro-galvanizing (ZB). Thanks to their clamps, some of these supports can also be fixed on the mast. For the wall fixing of the support it is recommended to use the anchor-bolts described on page "Anchor-bolts for bracket and mount fixing". code 80095 description Bent tube welded on round plate Ø 15 cm, thickness 4 mm with holes Ø 11,5 mm. 35 mm length A + B 25 + 25 cm thickness 1.4 mm packing 10 use For the wall fixing of small diameter dishes, combined with anchor-bolts code FVTC11 and FVTC14. Lue lisää...
    18,50 € (alv 0%)

    80095

  17. Teräspanta piippukiinnikk. lev. 40mm, pit. 25m

    Teräspanta piippukiinnikk. lev. 40mm, pit. 25m

    This range of chimney brackets is ideal for the chimney fixing of masts for small and medium diameter dishes or for TV aerials. The use of galvanized steel strip (code NFK-NFK5) is recommended. These brackets are finished with hot-galvanizing and white electro-galvanizing. code NFK description Galvanized steel strip 40 x 0.5 mm. length 250 cm Ø mast finish PZ packing 1 Lue lisää...
    32,90 € (alv 0%)

    NFK

  18. Teräspanta piippukiinnikk. lev. 40mm, pit. 5m

    Teräspanta piippukiinnikk. lev. 40mm, pit. 5m

    This range of chimney brackets is ideal for the chimney fixing of masts for small and medium diameter dishes or for TV aerials. The use of galvanized steel strip (code NFK-NFK5) is recommended. These brackets are finished with hot-galvanizing and white electro-galvanizing. code NFK5 description length 50 cm Ø mast finish PZ packing 6 Lue lisää...
    10,26 € (alv 0%)

    NFK5

  19. sivusyöttö 6° 8085/80100 ante EmmeEsse
  20. SAT-antenni offset 100cm teräs 40,3dB, harmaa
  21. SAT-antenni offset 85cm teräs 39,5dB, harmaa
  22. SAT-antenni offset 125cm alu 42,5dB, harmaa, single pack
  23. TV-antenni UHF 21-60 7,7dBi 14el UUSI VERSIO 2148UM
  24. TV-antenni UHF k21-48 8dBi 14el logper 636mm STUB LTEsuodin

    TV-antenni UHF k21-48 8dBi 14el logper 636mm STUB LTEsuodin

    Emme Esse - 2148UC 26elementtinen logperiodinen antenni Tekniset tiedot: LTE700 Kanavat 21-48 Vahvistus 8 dBi Elementtejä 14 Etu / Takasuhde 30 dB Pituus 636mm Tukkupakkaus 10 kpl Lue lisää...
    14,85 € (alv 0%)

    2148UM

  25. TV-paneeliantenni UHF k21-48 10-13dBi kork 840mm

    TV-paneeliantenni UHF k21-48 10-13dBi kork 840mm

    Panel antennas are wholly realised in aluminium, treated with anticorrosion process. The structure is strong and compact and a patented snap opening system of the dipoles allows to reduce the volume of the packages. Multiple panels with high gain and elevated directivity find their best employment in those areas where signals are poor or come from various directions. Emme Esse Patents channels 21 - 48 code 454PG dipoles 4 gain 10...13 dB F/B ratio 22 dB horizontal beamwidth 60°...32° wind loading 6.3 Kg length 840 mm packing 12 weight 17,100 volume 0,238 Lue lisää...
    28,00 € (alv 0%)

    454PG

  26. TV-antenni UHF k21-48 12-18dBi 35el 1145mm 5kpl/lte ICE LTE700

    TV-antenni UHF k21-48 12-18dBi 35el 1145mm 5kpl/lte ICE LTE700

    Emme Essen 45B5G on nopeasti kasattava, pinnoitettu ja MARINE-muoviosilla varustettu tv-antenni joka on tarkoitettu pohjolan oloihin. LTE700 kanavat 21-48 Vahvistus 12,5-18 dBi Etu/takasuhde 30 dBi Pituus 1150 Tuulikuorma 83 N @ 120 km/h 5 kpl laatikossa Lue lisää...
    49,68 € (alv 0%)

    45B5G

  27. TV-antenni UHF k21-60 11-15,5dBi Optica, 29el, 866mm ICE POISTO

    TV-antenni UHF k21-60 11-15,5dBi Optica, 29el, 866mm ICE POISTO

    Optica is the first all over painted antenna, carefully finished and ensuring the highest degrees of corrosion resistance. The coating is fully carried out in the paint shop just set up in the production plant. The no-rinse passivation technique, based on organic resins and derivatives of titanium, grants protective and environmental quality to the powder coating of the antenna. The antenna is made with elements of circular shape, completely pre-assembled for a quick and simple mounting. It has an excellent frequency response and a high match. Its modern design with smooth and careful lines, the compact sizes and the white color coating minimize the visual and environmental impact. The antenna is highly recommended in the presence of weak signals and is optimized for the reception of the television band up to the channel E60. channels 21 - 60 code 29OPT elements 29 gain 11.5...15.5 dB F/B ratio 28 dB horizontal beamwidth 24°...46° wind loading 9.1 Kg length 996 mm packing 5 weight 13,000 volume 0,186 Lue lisää...
    20,90 € (alv 0%)

    29OPT

  28. TV-antenni UHF k21-48 11-17dBi 25el 1130mm LTE700
  29. FM-antenni 2-elementtinen 3,5dBi ICE

    FM-antenni 2-elementtinen 3,5dBi ICE

    Emme Esse - FM-antenni 218 Taajuusalue FM 88-110 MHz Elementtejä 2 Vahvistus 3,5 dBi Etu/Takasuhde 12 dB Keilaleveys vaaka 76° Tuulikuorma 5,1 Kg Pituus 692 mm Paino 1,5kg Lue lisää...
    31,20 € (alv 0%)

    218

  30. FM-antenni rengasdipoli 1dBi 1el 233mm

    FM-antenni rengasdipoli 1dBi 1el 233mm

    Emme Esse - FM-antenni rengasdipoli 213 Taajuusalue FM 88-110MHz Elementtejä 1 Vahvistus 1dBi Tuulikuorma 3,3Kg Pituus 233 mm Paino 1kg Lue lisää...
    21,60 € (alv 0%)

    213

  31. Säädettävä vaimennin 0-20dB F-pikauros-naaras DC-läpimeno

    Säädettävä vaimennin 0-20dB F-pikauros-naaras DC-läpimeno

    Säädettävä vaimennin 0-20dB F-pika Uros / F-naaras DC-läpimeno Lue lisää...
    12,80 € (alv 0%)

    81935F

  32. Estosuodin LTE 5-48 putki F-uros/F-naaras 8 cells LTE700

    Estosuodin LTE 5-48 putki F-uros/F-naaras 8 cells LTE700

    taajuusalue DC - 694 MHz läpimeno vaimennus >-1dB vaimennus: 694 MHz -5 dB 698 MHz -11.5 dB 703 MHz -26 dB Lue lisää...
    9,80 € (alv 0%)

    81947L48

  33. Estosuodin LTE 5-48 vesitiivis F-naaras/F-naaras 8 cells LTE700
  34. Estosuodin LTE DC-694 F-liittimet LTE700 Mastokotelo

    Estosuodin LTE DC-694 F-liittimet LTE700 Mastokotelo

    taajuusalue DC - 694 MHz läpimeno vaimennus >-1dB vaimennus: 694 MHz -5 dB 698 MHz -11.5 dB 703 MHz -26 dB Lue lisää...
    18,70 € (alv 0%)

    83124L48

  35. Päästösuodin 478-694MHz F-liittimet LTE700 Mastokotelo
  36. Optinen lähetin 1310 nm, 10 dBm SC/APC lähtö

    Optinen lähetin 1310 nm, 10 dBm SC/APC lähtö

    Emme Esse 80619T - Optinen lähetin Optinen lähetin antenniverkon (DTT 47 - 1000 MHz) kautta. Suunniteltu FTTH-sovelluksiin. Ominaisuudet - RF-tulotaso: 80 ± 5 dBµV - Optinen lähtöteho: 10 dBm - Aallonpituus: 1310 nm - Optinen liitin: SC / APC - RF-liitin: F naaras - Mitat: 100 * 98 * 28 mm Lue lisää...
    458,00 € (alv 0%)

    80619T

  37. Taajuusmuunnin TWIN 56dB, kohina 0,2dB
  38. Taajuusmuunnin quattro 56dB, kohina 0,2dB, 200mA
  39. Taajuusmuunnin QUAD 56dB, kohina 0,2dB
  40. Taajuusmuunnin single 0,3dB vahvistus 57dB

Taulukkona  Lista 

Tuotteet 1-40 / 50

Nouseva
Sivu:
  1. 1
  2. 2