My Cart

0 item(s)

Antennitarvikkeet

Grid  List 

56 Item(s)

Set Ascending Direction
  1. Seinäkiinnike 50mm seinästä Ø40-75mm, avattavat lenkkilaatat
  2. Piippukiinnike ø30-50mm putkelle galvanoitu, 2 elementtiä
  3. Piippukiinnike ø30-50mm putkelle galvanoitu panta NFK (ei sis.)
  4. Maataso 1m ø50mm 18x18 levy Yhteesopiva 438L15 kanssa

    Maataso 1m ø50mm 18x18 levy Yhteesopiva 438L15 kanssa

    A series of accessories to fix the mast of a TV or SAT antenna to the wall or to ground. The wall brackets are fixed by 2 dowels and differ from each other for the thickness of the plate, the hot or electro galvanizing and the length determining the mounting stand-off of the mast from the wall. The ground supports are plates endowed with clamp for the mast attack fixed to the ground. code 642 description Groundstand with 4-hole (ø 12 mm) 18 x 18 cm plate (thickness 3 mm) and 1 mt mast (thickness 1,5 mm) welded on the plate. stand-off Ø mast 50 mm finish ZB packing 1 use Suitable for fixing of masts for small diameter dishes, with anchor-bolts FVTC11, FVTC14, FVTC8 and FVTC1. Learn More
    €16.91 (alv 0%)

    642

  5. Mastoputki teleskooppi 3x2m ø35-30-25mm, kuumasinkitty
  6. Vertikaalitanko ø30mm 50cm

    Vertikaalitanko ø30mm 50cm

    Accessories for the installation of TV antennas: ropes, tie rods, guy-rings and insulators allowing the best firmness of the antenna cable. Other accessories are brackets for the anchorage of masts for TV or SAT antennas and insulators for the fixing of cables onto the wall. code 418L finish ZF description size L = 50 cm packing 10 Learn More
    €7.43 (alv 0%)

    418L

  7. Seinälenkki 50mm

    Seinälenkki 50mm

    Mechanical accessories for the installation of the TV antenna. The U-bolt allows fixing the telescopic mast to the loop-through mast with bent for cable. This mast is usually mounted on the roof ridge. Thimble and clamps are usually employed for the fixing of ropes that act as tie rods. code 412E finish ZB description size Ø 50 mm packing 10 Learn More
    €3.00 (alv 0%)

    412E

  8. Mastoputki 2m ø40mm jatkettava sähkösinkitty, toim. 6kpl erissä

    Mastoputki 2m ø40mm jatkettava sähkösinkitty, toim. 6kpl erissä

    code 437L2 length 2.0 m diameter 40 mm thickness 1.2 mm description tapered with plug finish ZB packing 6 Learn More
    €14.66 (alv 0%)

    437L2

  9. Seinälenkki 40mm

    Seinälenkki 40mm

    €2.00 (alv 0%)

    412C

  10. Mastoputken kiinnike ø20-40mm kuumasinkitty, 200mm seinästä
  11. Mastoputki 2m ø50mm 2,0mm sähkösinkitty 3kpl erissä

    Mastoputki 2m ø50mm 2,0mm sähkösinkitty 3kpl erissä

    Korvaa tuotteen 438L15 Learn More
    €16.72 (alv 0%)

    80075GPZ

  12. Antennin kiinnike ø40mm galvan. seinästä 26cm
  13. Antennin kiinnike ø40mm galvan. seinästä 460 mm

    Antennin kiinnike ø40mm galvan. seinästä 460 mm

    These products are studied for the wall fixing of parabolic dishes. Composed of a bent tube welded on a plate with drills (round or square), they are offered in various versions differing for kind of plate and tube. Some of these items are hot galvanized (ZF), whereas the others are finished with electro-galvanizing (ZB). Thanks to their clamps, some of these supports can also be fixed on the mast. For the wall fixing of the support it is recommended to use the anchor-bolts described on page "Anchor-bolts for bracket and mount fixing". code 80099S description Bent tube welded on rectangular plate 15x20 cm, thickness 4 mm with holes Ø 12 mm. 40 mm length A + B 46 + 27 cm thickness 1.4 mm packing 3 use Suitable for the wall fixing of small and medium diameter dishes, with anchor-bolts code FVTC11 and FVTC14. Learn More
    €23.00 (alv 0%)

    80099S

  14. Antennin kiinnike ø50mm galvan. seinästä 580 mm
  15. Antennin kiinnike ø35mm galvan. seinästä 250 mm korkeus 250mm

    Antennin kiinnike ø35mm galvan. seinästä 250 mm korkeus 250mm

    These products are studied for the wall fixing of parabolic dishes. Composed of a bent tube welded on a plate with drills (round or square), they are offered in various versions differing for kind of plate and tube. Some of these items are hot galvanized (ZF), whereas the others are finished with electro-galvanizing (ZB). Thanks to their clamps, some of these supports can also be fixed on the mast. For the wall fixing of the support it is recommended to use the anchor-bolts described on page "Anchor-bolts for bracket and mount fixing". code 80095 description Bent tube welded on round plate Ø 15 cm, thickness 4 mm with holes Ø 11,5 mm. 35 mm length A + B 25 + 25 cm thickness 1.4 mm packing 10 use For the wall fixing of small diameter dishes, combined with anchor-bolts code FVTC11 and FVTC14. Learn More
    €18.50 (alv 0%)

    80095

  16. Teräspanta piippukiinnikk. lev. 40mm, pit. 25m

    Teräspanta piippukiinnikk. lev. 40mm, pit. 25m

    This range of chimney brackets is ideal for the chimney fixing of masts for small and medium diameter dishes or for TV aerials. The use of galvanized steel strip (code NFK-NFK5) is recommended. These brackets are finished with hot-galvanizing and white electro-galvanizing. code NFK description Galvanized steel strip 40 x 0.5 mm. length 250 cm Ø mast finish PZ packing 1 Learn More
    €32.90 (alv 0%)

    NFK

  17. Teräspanta piippukiinnikk. lev. 40mm, pit. 5m

    Teräspanta piippukiinnikk. lev. 40mm, pit. 5m

    This range of chimney brackets is ideal for the chimney fixing of masts for small and medium diameter dishes or for TV aerials. The use of galvanized steel strip (code NFK-NFK5) is recommended. These brackets are finished with hot-galvanizing and white electro-galvanizing. code NFK5 description length 50 cm Ø mast finish PZ packing 6 Learn More
    €10.26 (alv 0%)

    NFK5

  18. sivusyöttö 6° 8085/80100 ante EmmeEsse
  19. SAT-antenni offset 100cm teräs 40,3dB, harmaa
  20. SAT-antenni offset 85cm teräs 39,5dB, harmaa
  21. SAT-antenni offset 125cm alu 42,5dB, harmaa, single pack
  22. TV-antenni UHF 21-60 7,7dBi 14el UUSI VERSIO 2148UM
  23. TV-antenni UHF k21-48 8dBi 14el logper 636mm STUB LTEsuodin

    TV-antenni UHF k21-48 8dBi 14el logper 636mm STUB LTEsuodin

    Emme Esse - 2148UC 26elementtinen logperiodinen antenni Tekniset tiedot: LTE700 Kanavat 21-48 Vahvistus 8 dBi Elementtejä 14 Etu / Takasuhde 30 dB Pituus 636mm Tukkupakkaus 10 kpl Learn More
    €14.85 (alv 0%)

    2148UM

  24. TV-paneeliantenni UHF k21-48 10-13dBi kork 840mm

    TV-paneeliantenni UHF k21-48 10-13dBi kork 840mm

    Panel antennas are wholly realised in aluminium, treated with anticorrosion process. The structure is strong and compact and a patented snap opening system of the dipoles allows to reduce the volume of the packages. Multiple panels with high gain and elevated directivity find their best employment in those areas where signals are poor or come from various directions. Emme Esse Patents channels 21 - 48 code 454PG dipoles 4 gain 10...13 dB F/B ratio 22 dB horizontal beamwidth 60°...32° wind loading 6.3 Kg length 840 mm packing 12 weight 17,100 volume 0,238 Learn More
    €28.00 (alv 0%)

    454PG

  25. TV-antenni UHF k21-48 12-18dBi 35el 1145mm 5kpl/lte ICE LTE700

    TV-antenni UHF k21-48 12-18dBi 35el 1145mm 5kpl/lte ICE LTE700

    Emme Essen 45B5G on nopeasti kasattava, pinnoitettu ja MARINE-muoviosilla varustettu tv-antenni joka on tarkoitettu pohjolan oloihin. LTE700 kanavat 21-48 Vahvistus 12,5-18 dBi Etu/takasuhde 30 dBi Pituus 1150 Tuulikuorma 83 N @ 120 km/h 5 kpl laatikossa Learn More
    €49.68 (alv 0%)

    45B5G

  26. TV-antenni UHF k21-60 11-15,5dBi Optica, 29el, 866mm ICE POISTO

    TV-antenni UHF k21-60 11-15,5dBi Optica, 29el, 866mm ICE POISTO

    Optica is the first all over painted antenna, carefully finished and ensuring the highest degrees of corrosion resistance. The coating is fully carried out in the paint shop just set up in the production plant. The no-rinse passivation technique, based on organic resins and derivatives of titanium, grants protective and environmental quality to the powder coating of the antenna. The antenna is made with elements of circular shape, completely pre-assembled for a quick and simple mounting. It has an excellent frequency response and a high match. Its modern design with smooth and careful lines, the compact sizes and the white color coating minimize the visual and environmental impact. The antenna is highly recommended in the presence of weak signals and is optimized for the reception of the television band up to the channel E60. channels 21 - 60 code 29OPT elements 29 gain 11.5...15.5 dB F/B ratio 28 dB horizontal beamwidth 24°...46° wind loading 9.1 Kg length 996 mm packing 5 weight 13,000 volume 0,186 Learn More
    €20.90 (alv 0%)

    29OPT

  27. TV-antenni UHF k21-48 11-17dBi 25el 1130mm LTE700
  28. FM-antenni 2-elementtinen 3,5dBi ICE

    FM-antenni 2-elementtinen 3,5dBi ICE

    All ICE series antennas have Rohs compatible anticorrosion white treatment in three main stages: - alkaline degreasing - deoxidation - passivation Info channels FM code 218 elements 2 gain 3,5 dB F/B ratio 12 dB horizontal beamwidth 76° wind loading 5,1 Kg length 692 mm packing 10 weight 10,500 volume 0,126 Learn More
    €31.20 (alv 0%)

    218

  29. FM-antenni rengasdipoli 1dBi 1el 233mm

    FM-antenni rengasdipoli 1dBi 1el 233mm

    Info channels FM code 213* elements 1 gain 1 dB F/B ratio - horizontal beamwidth - wind loading 3,3 Kg length 233 mm packing - weight - volume - Learn More
    €21.60 (alv 0%)

    213

  30. Transmod. DVB-S/S2/T/T2/C 8viritintä, 8xMUX DVB-C tai -T

    Transmod. DVB-S/S2/T/T2/C 8viritintä, 8xMUX DVB-C tai -T

    MK-800 transmodulaattori muuntaa DVB-palvelut jopa kahdeksasta tulosta, kahdeksaan kaapeli DVB-C tai antenniformaatin DVB-T lähtöön. Tällöin kyseiset teräväpiirto-ohjelmat voidaan vastaanottaa normaalilla virittimellä. - Webbipohjaisella Axing Smartportalin avulla ohjelmointi mahdollista mistä vain missä on internetyhteys. - Lähtökanava-alue vapaasti valittavissa välillä 114 - 1002 MHz. - Kanavamuistipaikka numerointi LCN (Logical Channel Number) voidaan tallentaa manuaalisti ja kanavakohtaisesti. - Automaattinen/manuaalinen NIT. - Asennettavissa 19” räkkiin tai yksinään suoraan seinälle. - CA-modulit mahdollista käyttää useassa eri tulonipussa. - Ns. flexcam support. - 6 CA-modulipaikkaa. Learn More
    €1,824.90 (alv 0%)

    MK-800

  31. 4xHDMI > 2xDVB-C/T Enkooderi 1U 19  räkkiin/seinään
  32. Säädettävä vaimennin 0-20dB F-pikauros-naaras DC-läpimeno

    Säädettävä vaimennin 0-20dB F-pikauros-naaras DC-läpimeno

    code 81935F description connectors F gain 0...-20dB packing 5 Learn More
    €12.80 (alv 0%)

    81935F

  33. Estosuodin LTE 5-48 putki F-uros/F-naaras 8 cells LTE700

    Estosuodin LTE 5-48 putki F-uros/F-naaras 8 cells LTE700

    taajuusalue DC - 694 MHz läpimeno vaimennus >-1dB vaimennus: 694 MHz -5 dB 698 MHz -11.5 dB 703 MHz -26 dB Learn More
    €9.80 (alv 0%)

    81947L48

  34. Estosuodin LTE 5-48 vesitiivis F-naaras/F-naaras 8 cells LTE700
  35. Estosuodin LTE DC-694 F-liittimet LTE700 Mastokotelo

    Estosuodin LTE DC-694 F-liittimet LTE700 Mastokotelo

    taajuusalue DC - 694 MHz läpimeno vaimennus >-1dB vaimennus: 694 MHz -5 dB 698 MHz -11.5 dB 703 MHz -26 dB Learn More
    €18.70 (alv 0%)

    83124L48

  36. Päästösuodin 478-694MHz F-liittimet LTE700 Mastokotelo
  37. Optinen lähetin 1310 nm, 10 dBm SC/APC lähtö

    Optinen lähetin 1310 nm, 10 dBm SC/APC lähtö

    Active components for the conversion of the SAT/TV signal into an installation with fiber optic distribution. In order to distribute the TV signal via fiber optic it is first necessary to convert the signal into optic and then, before sending it to the users, re-convert it into electric. This is the reason why every kind of optic converter is always available as Transmitter (electric-to-optic) or Receiver (optic-to-electric). There are several models of optic converter: Optic LNB for SAT only installations or LNB KIT + interface for mixed distributions on single fiber, bi-directional kits, TV-only converters and wide band SAT signal distribution interfaces with recessed sockets and built-in optical converter. Code 80619T description Optical transmitter for multiuser systems over a singlemode fiber of DTT signal (47 - 1000MHz). Designed for FTTH applications. features • RF input level: 80 ± 5 dBµV• Optical output power: 10 dBm• Wavelength: 1310 nm • Optical connector: SC / APC• Electrical connector: F female• Dimensions: 100 * 98 * 28 mm Learn More
    €458.00 (alv 0%)

    80619T

  38. Taajuusmuunnin TWIN 56dB, kohina 0,2dB
  39. Taajuusmuunnin quattro 56dB, kohina 0,2dB, 200mA
  40. Taajuusmuunnin QUAD 56dB, kohina 0,2dB
  41. Taajuusmuunnin single 0,3dB vahvistus 57dB
  42. Jaotin 1/3 5-2300MHz pikaliitos DC-syöttö

    Jaotin 1/3 5-2300MHz pikaliitos DC-syöttö

    Emme Esse 81652 - Jaotin kolmeen Jaottimen pikaliitoksen erikoisominaisuuden ansiosta nämä Plug IN jaottimet on helppo asentaa myös hyvin pieniin tiloihin. Taajuus alue: 5 ÷ 2400 MHz Tekniset tiedot: Lähdöt 3 Tyyppi passiivinen Läpimenovaimennus 7 dB TV / 9 dB SAT Heijastusvaimennus > 20 dB TV / > 20 dB SAT Mitat 42 x 17 x 27 mm Learn More
    €5.34 (alv 0%)

    81653

  43. Jaotin 1/4 5-2300MHz pikaliitos DC-syöttö

    Jaotin 1/4 5-2300MHz pikaliitos DC-syöttö

    Emme Esse - 81654 - Jaotin neljään Jaottimen pikaliitoksen erikoisominaisuuden ansiosta nämä Plug IN jaottimet on helppo asentaa myös hyvin pieniin tiloihin. Taajuus alue: 5 ÷ 2400 MHz Tekniset tiedot: Lähdöt 4 Tyyppi passiivinen Läpimenovaimennus 9 dB TV / 11 dB SAT Heijastusvaimennus > 20 dB TV / > 20 dB SAT Mitat 62 x 17 x 32 mm Learn More
    €7.08 (alv 0%)

    81654

  44. Jaotin 1/2 5-2300MHz pikaliitos DC-syöttö

    Jaotin 1/2 5-2300MHz pikaliitos DC-syöttö

    Emme Esse - 81652 PlugIN Splitters are realized by die-casting mechanics and screened clamps for the cable fixing. This special feature makes these components easy to install even in very small spaces. The range includes 2, 3 and 4 output splitters for the SAT & TV signal distribution. Freq. range: 5 ÷ 2400 MHz SAT+TV signal taps, ideal for analogue and digital signal installations. The range includes 3 versions with different number of tap outputs. Each model is available with different attenuation values to realize complex installations. Die-casting mechanics is endowed with screened clamps to reduce to the minimum the size and allow housing also in very small boxes. Freq. range: 5 ÷ 2400 MHz Technical info: code 81652 outputs 2 type passive insertion loss -4 dB TV/ -7 dB SAT uncoupling >20 dB TV/ >20 dB SAT dimensions 42 x 17 x 27 mm Learn More
    €4.29 (alv 0%)

    81652

  45. Data-TV suodin IECu - IECn - F

    Data-TV suodin IECu - IECn - F

    €8.47 (alv 0%)

    TZU21-65

  46. Verkkolaite 12VDC/150mA, 1 lähtö

    Verkkolaite 12VDC/150mA, 1 lähtö

    €15.70 (alv 0%)

    83965CE

  47. Mastovahvistin VHF15-30dB/ UHF15-30/UHF15-30dB  12V LTE
  48. Mastovahvistin LOG25dB/U25dB 12VDC

    Mastovahvistin LOG25dB/U25dB 12VDC

    €16.50 (alv 0%)

    83214TL

  49. Esivahvistin UHF 15dB 5-12V AGC 112dBuV F-uros/F-naaras
  50. Esivahvistin VHF 12dB 12V putki 108 dBµV
  51. Esivahvistin UHF 12dB 12V F-uros/F-naaras LTE-suodin

    Esivahvistin UHF 12dB 12V F-uros/F-naaras LTE-suodin

    Preamplifiers with direct joint on the antenna with F connector and power supply 12V or 5V from the output connector. Brass mechanics and connectors for outdoor use. code 81942L bands UHF inputs 1 F/m power supply 12V gain 12 dB output level 108 dBμV noise figure 1.9 dB Learn More
    €18.92 (alv 0%)

    81942L

  52. Esivahvistin UHF 15dB 5V F-uros/F-naaras EOL
  53. Jakovahvistin 40dB 85-1006 MHz akt.paluu 30dB 5-65 MHz

    Jakovahvistin 40dB 85-1006 MHz akt.paluu 30dB 5-65 MHz

    KDG 1TS140: D(4.4) full load Local power supply GaAs technology Downstream 85…1006 MHz Attenuation/equalization adjustable with PCB switches Interstage attenuation/equalization pluggable with jumpers Cable simulator BZU 80-02 pluggable Upstream 5...65 MHz Active/passive pluggable with jumpers Attenuation adjustable with PCB switch Interstage attenuation/equalization pluggable with jumpers Al-die-cast housing Test ports at in- and output Learn More
    €196.35 (alv 0%)

    BVS14-69

  54. Jakovahvistin 38dB 85-1006 MHz akt.paluu 30dB 5-65 MHz

    Jakovahvistin 38dB 85-1006 MHz akt.paluu 30dB 5-65 MHz

    KDG 1 TS 140: C(4.2) Downstream 85…1006 MHz Attenuation and equalization adjustable Interstage attenuation/equalization pluggable with jumpers Upstream 5...65 MHz Return path attenuation adjustable Interstage attenuation/equalization pluggable with jumpers Al-die-cast/plastic housing Test ports at in- and output Learn More
    €113.72 (alv 0%)

    BVS15-68

  55. Jakovahvistin 38dB 85-1006 MHz 30dB akt.p 5-65 MHz kaukosyöttö

    Jakovahvistin 38dB 85-1006 MHz 30dB akt.p 5-65 MHz kaukosyöttö

    Axing BVS15-68RPAC - premiumline pientalovahvistin kaukosyötöllä - Taajuusalue 85…1006 MHz - Vaimennus ja kaltevuus säädettävissä jumppereilla - Paluusuunnan taajuusalue 5...65 MHz - Paluusuunnan vaimennus säädettävissä jumppereilla - Testiportit sisä- ja ulostulossa - Kaukosyötettävä Tekniset tiedot: Taajuusalue 85...1006MHz Vahvistus 18...38 dB Vaimennus DS 0...20 dB Kaltevuus 0...18 dB Learn More
    €317.05 (alv 0%)

    BVS15-68RPAC

  56. Jakovahvistin 28dB paik/kaukosyö 88-862MHz, 5-65MHz 0dB

Grid  List 

56 Item(s)

Set Ascending Direction